Abstract:Advanced ceramics find significant application areas due to their superior mechanical, electrical, magnetic chemical and thermal properties. By combining these materials, significant properties can be obtained as a result of production of the composites of hard metal compounds in nanoscale dimensions. Self-propagated high-temperature synthesis (SHS) is one of the prominent methods for the production of such nanoparticles. SHS is a combustion synthesis method. In this study, nanocomposite powders of B4C-TiB2 were synthesized by SHS method. FactSage software was used for thermochemical simulation and computational stoichiometric optimization. In the experimental step, 2 different SHS sets were prepared. In the first stage, B4C and TiB2 powders were synthesized. The B4C-TiB2 composite was produced in the final set of experiments. Then, production parameters of B4C-TiB2 composite powders, from B2O3, TiO2, and carbon black, were investigated. Magnesium powder was used as reductant agent. Afterwards, HCl leaching process was performed, and acid concentration was optimized. The effect of carbonic acid and H2O2 addition on dissolution of undesired phases was also been investigated as a new method. Products were characterized by XRD, SEM and BET analysis. B4C-TiB2 composite powder with quite high surface area, fine particle size and high porosity could be synthesized with reasonable purity. According to the results, the optimum molar ratios were determined as TiO2:B2O3:Mg:C = 1:3:12:1.6. Optimum acid concentration was found to be 10.5 M for leaching process, and carbonic acid addition on leaching step found to be effective on TiO2 removal. The highest purity could be obtained with 50%-50% stoichiometry. It has also been determined that the synthesis of B4C-TiB2 composite powder has a positive effect on both the chemical content and the morphology that will increase the sintering ability.

Self-Propagating High-Temperature Synthesis Pressing of Composites Based on the TiB2–B4C–Al System

Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic–matrix composites

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Self-propagating high-temperature synthesis of TiC-TiB2/Cu ceramic-matrix composite

Synthesis and Performance of TiB2–B4C Composites by High Pressure of TiC–B Mixture

Self-propagating high temperature combustion synthesis of TiB/Ti composites

Nano- and Submicron-Sized TiB2 Particles in Al–TiB2 Composite Produced in Semi-Industrial Self-Propagating High-Temperature Synthesis Conditions

Microstructure and mechanical properties of TiB2–B4C ceramics fabricated by hot-pressing

Microstructure and mechanical properties of b4c-tib2 composites reactive sintered from B4C + TiO2 precursors

Ceramic Matrix Composites Obtained by the Reactive Sintering of Boron Carbide with Intermetallic Compounds from the Ti-Si System

Effect of Powder Synthesis Processing on Microstructure and Mechanical Properties of TiB2-TiC Composite Ceramics

Production and Properties of B4C–TiB2 Composites with Isotropic Eutectic Microstructure

Microstructure and Performance of Solidified TiB2TiC Composites Prepared by High Pressure and High Temperature

Preparation of Dense TiB2 by Forced Self-Propagating High-Temperature Synthesis Compaction with Mechanical Activation of Reagents

Microstructures and mechanical properties of B4C‐SiC and B4C‐SiC‐TiB2 ceramic composites fabricated by hot pressing

Production of B4C-TiB2 composite powder by self-propagating high-temperature synthesis

TiB₂-Based Composites for Ultra-High-Temperature Devices, Fabricated by SHS, Combining Strong and Weak Exothermic Reactions

Synthesis and Mechanism of TiB2–TiN Ceramic Composites by High-Pressure Method

Self-Propagating High-Temperature Synthesis, Microstructure and Mechanical Properties of Tic-Tib2-Cu Composites

High‐strength TiB 2 ‐B 4 C Composite Ceramics Sintered by Spark Plasma Sintering