Abstract:Zirconia ceramics have become increasingly used as dental implant material which is mainly due to their "tooth-like" color, superior biocompatibility, and excellent mechanical properties. However, the bio-inertness of the zirconia surface limits its use for a wider range of clinical applications. To enhance the surface bioactivity, a combination of magnetron sputtering, and anodization has in the present study been used to deposit a homogeneous nano-porous coating (ZrNP) on the zirconia surface (forming ZrO2/ZrNP with a ZrNP pore diameter of 20-30 nm, and a ZrNP layer thickness of similar to 2 mu m). EDS and XRD analysis showed that the distribution of the surface chemical components, as well as the crystalline structure of the zirconia (ZrO2), remained unchanged. On the other hand, the hydrophilicity of the ZrO2/ZrNP surface became significantly improved (as compared with a control group). In addition, the bond strength of the coating was decreased as a result of the anodization treatment. Moreover, both the Zr and ZrNP nanolayers exhibited improved proliferation and osteogenic properties in the in vitro cell experiment. Also, the ZrNP nanolayer was found to promote the biocompatibility and osteogenic ability to the largest extent. The ZrNP nanolayer did also provide numerous adhesion sites for MC3T3-E1 whereby the cell morphology could be enhanced. Additionally, the nano porous ZrNP layer improved the new bone formation around the zirconia implant and did robustly enhance the push out bond strength, thereby indicating the best osteointegration ability. In conclusion, a nano porous zirconium layer has been found to be very promising for the improvement of the bioactivity of the zirconia implant material.

Preparation and Characterization of Black Zirconia Ceramics by Black Color Spinel Pigment

Preparation and research of new black zirconia ceramics

Preparation and properties of black Ti-doped zirconia ceramics

Preparation and characterization of inverse spinel green nano-ceramic pigment

Synthesis and Chromatic Properties of Zircon Encapsulated Ceramic Black Pigment with Carbon Sphere As Carbon Source

Preparation, Chromatic Properties Analysis and Proportioning Optimization of Co-Cr-Fe-Based Black Pigment

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

The characteristic and osteogenic effect of a nanoporous coating of zirconia implant

Fabrication of black-colored CuO–Al2O3–ZrO2 ceramics via heterogeneous nucleation method

Research on Optical Property of Black-Colored Zirconia Ceramics by Photoluminescence, Raman and Visible Reflectivity Spectra

Effect of the nickel molar content on the preparation and properties of spinel-type black ceramic pigment by microwave processing from stainless steelmaking dust

Synthesis of black ceramic pigments from secondary raw materials

Synthesis and properties of novel blue zirconia ceramic based on Co/Ni-doped BaAl12O19 blue chromophore

Effective Synthesis of Green Nano‐sized Ceramic Pigments by Co‐doping Zn2+, Cr3+ and Sm3+ into the Cobalt‐aluminate

Fabrication of Colored Zirconia Ceramics Doped with the Spinelvia Heterogeneous Nucleation Method

Preparation of Black-Colored Zirconia Ceramics via Heterogeneous Precipitation

The Color of Fe<sub>2</sub>O<sub>3</sub> and Bi<sub>2</sub>O<sub>3</sub> Pigmented Dental Zirconia Ceramic

Submicronic Spherical Inclusion Black Pigment by Double‐shell Reaction Sintering

The Preparation and Properties of Zircon—Vanadium Blue Ceramic Pigment

Pigments based on Er2O3-Al2O3: Preparation and colouring performance in zirconia ceramics

Synthesis and chromatic properties of V-doped and V/Y-codoped ZrO2 yellow pigments