Abstract:Copper oxide thin films were grown on (111)-oriented MgO substrates via the DC magnetron sputtering technique. High-purity copper was used as target material. The films were grown in an atmosphere of pure argon at a pressure of 1.27 torr. The substrate temperature was maintained at 400 °C during the growth. After deposition, the films were annealed in-situ in an argon/oxygen atmosphere (80%/20%) at 450 °C for either two or four minutes. It was found that the annealing time was a sensitive process parameter for achieving single- or mixed-phase copper oxide thin films. The single-phase cuprous (Cu2O) oxide films were obtained with the shorter annealing time (two minutes). Longer annealing times led to destabilization of the Cu2O phase, concomitant with the formation of the cupric oxide (CuO) phase in the sample. From optical spectroscopy studies, a band gap value of 2.4 eV was determined for the Cu2O films. This value decreased for the mixed-phase films. Near-infrared spectroscopy spectra were characterized by the presence of troughs and peaks, probably stemming from volume and surface scattering. Furthermore, differences in the intensity of the absorption with the chosen annealing process were observed, which were probably associated with slight variations in the grain size and/or morphology of the films. The electrical behavior of the films was investigated by means of complex impedance spectroscopy and DC transport measurements. Strong dependence of the electrical properties on the frequency and temperature was observed. The impedance spectra were well modeled in terms of equivalent electrical circuits. As a result, it was found that the predominant contribution to the resistance and capacitance of the Cu2O films came from the bulk of the grains. It was also verified that the relaxation of the charge carriers was a thermally active process with an activation energy of ~ 0.17 eV. A semiconducting-like behavior in the 100–320 K temperature range was also verified. The electronic transport mechanism in the Cu2O films was satisfactorily described within the framework of the Mott variable range hopping model. From the fit of this model to the experimental data, values as high as 3.5 × 1018 eV−1 cm−3 and ~ 12 nm were estimated for the density of states at the Fermi level and the hopping distance, respectively.

Pulsed laser deposition of single phase n- and p-type Cu2O thin films with low resistivity

P-type Transparent Conducting Copper Aluminum Oxide Films with Different Cu/Al Ratio

The effect of substrate temperature and oxygen partial pressure on the properties of nanocrystalline copper oxide thin films grown by pulsed laser deposition

Oxide phase and conductivity-type of copper oxide thin films deposited by direct current magnetron sputtering

Atomic layer deposited p-type copper oxide thin films and the associated thin film transistor properties

Influence of oxygen pressure on the growth and physical properties of pulsed laser deposited Cu2O thin films

Fabrication of P-Type Copper Oxide Thin-Film Transisters at Different Oxygen Partial Pressure

High-Performance p-Type Transparent Conducting CuI−Cu2O Thin Films with Enhanced Hole Mobility, Surface, and Stability

Study on P-Type Nickel-doped CuO Transparent Conductive Films Prepared at Room Temperature

Copper doped nickel oxide transparent p-type conductive thin films deposited by pulsed plasma deposition

On the dielectric properties and conduction mechanism in cuprous oxide thin films grown on (111)-oriented MgO substrates by means of non-reactive DC magnetron sputtering

Electrodeposition of Phase–Pure n–Type Cu 2 O: Role of Electrode Reactions and Local pH

N-type In (or Al) doped Cu2O thin films by magnetron sputtering

Pressure controlled tunable magnetic, electrical and optical properties of (Cu, Li)-codoped ZnO thin films

Improving the p–type conductivity of Cu2O thin films by Ni doping and their heterojunction with n–ZnO

EPITAXIAL GROWTH OF CUPROUS OXIDE ELECTRODEPOSITED ONTO SEMICONDUCTOR AND METAL SUBSTRATES

Properties of Spray Pyrolysied Copper Oxide Thin Films

Realization of tunable fabrication from Cu nanoparticles film towards Cu 2 O thin film by pulse laser deposition method

Study of Deposition Temperature Effect on Spray-Deposited Copper Oxide Thin Films and Its Schottky Diodes

Preparation and Characterization of p-Type Copper Gallium Oxide (CuGaO2) Thin Films by Dual Sputtering Using Cu and Ga2O3 Targets

Ultrathin transparent Copper(I) oxide films grown by plasma-enhanced atomic layer deposition for Back-end-of-line p-Type transistors