A highly pixelated CdZnTe detector based on \textit{Topmetal-${II}^-$} sensor

Shuguang Zou,Yan Fan,Xiangming Sun,Guangming Huang,Hua Pei,Zhen Wang,Jun Liu,Ping Yang,Dong Wang

DOI: https://doi.org/10.1088/1674-1137/41/4/046003

2017-01-11

Abstract:\textit{Topmetal-${II}^-$} is a low noise CMOS pixel direct charge sensor with a pitch of 83$\mu m$. CdZnTe is an excellent semiconductor material for radiation detection. The combination of CdZnTe and the sensor makes it possible to build a detector with high spatial resolution. In our experiments, an epoxy adhesive is used as the conductive medium to connect the sensor and Cadmium Zinc Telluride (CdZnTe). The diffusion coefficient and charge efficiency of electrons are measured at a low bias voltage of -2 Volts, and the image of a single alpha is clear with a reasonable spatial resolution. The detector of such structure has the potential to be applied in X-ray imaging systems with a further improvements of the sensor.

Instrumentation and Detectors

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a CdZnTe (cadmium - zinc - telluride) detector with high spatial resolution for radiation detection. CdZnTe is an excellent semiconductor material with high resistivity, large atomic number and high bandgap, which is suitable for radiation detection. By using the low - noise CMOS pixel direct charge sensor Topmetal - II− combined with CdZnTe crystals, the researchers aim to construct a detector that can work at a relatively low bias voltage (- 2 volts), has good spatial resolution, and has a relatively simple and convenient connection method. Instead of using the traditional metal electrode connection method, epoxy glue is used as a conductive medium to connect the sensor and CdZnTe crystals.

Specifically, the paper focuses on the following aspects:

1. **Improving spatial resolution**: By using the highly pixelated Topmetal - II− sensor, the researchers hope to achieve higher spatial resolution, which is crucial for applications such as X - ray imaging systems.

2. **Simplifying the manufacturing process**: Traditional CdZnTe detectors are usually connected to the read - out module through metal electrodes, which requires complex process steps. This paper proposes a simpler method, that is, using epoxy glue as a connection medium, thereby simplifying the manufacturing process of the detector.

3. **Evaluating performance**: The researchers tested the detector's noise, diffusion coefficient and charge efficiency to verify its feasibility in practical applications. The experimental results show that although the charge collection efficiency of the detector is relatively low (about 3.5%) at a bias voltage of - 2 volts, its spatial resolution is still satisfactory and can clearly capture the image of a single α - particle.

In conclusion, the main goal of this paper is to develop a new type of radiation detector with high spatial resolution by combining the Topmetal - II− sensor and CdZnTe crystals, and to explore its potential applications in medical imaging, Compton cameras and other fields.