Abstract:In superconducting Nb3Sn layers with coherence lengths of approximately 3 nm, grain boundaries act as effective pinning sites. Thus, grain refinement is an essential issue that directly affects the superconducting critical characteristics of the Nb3Sn layer. In recent years, Hf addition to Nb3Sn wires co-doped with Ta has attracted notable interest as a method that enables grain refinement down to several tens of nm. In-depth characterization of the Nb3Sn grain morphology in Hf-doping is crucially important to correlate the microstructure with the flux pinning characteristics. In this article, the grain morphologies of Ti–Hf and Ta–Hf-doped Nb3Sn layers were clarified by scanning transmission electron microscopy (STEM) and TEM-based automated crystal orientation mapping (ACOM-TEM). STEM/energy dispersive X-ray spectroscopy (EDS) revealed no significant oxide precipitates in our samples. The grain size distribution was attained by ACOM-TEM. Although Hf-doping attained a grain refinement effect in the Nb3Sn layer in both doping cases, the degree of this effect was relatively small for Ti–Hf. Kernel average misorientation (KAM) analysis by scanning electron microscopy-electron backscatter diffraction (SEM-EBSD) unveiled no appreciable difference between the internal strain states of the Nb-alloy parent phases in Ti–Hf and Ta–Hf. One remarkable new finding through STEM/EDS was the presence of a Cu–Hf compound phase in the Nb3Sn layer. The Cu–Hf compound sounds analogous to the Cu–Ti compounds that form when Nb–47Ti with Cu matrix is heat treated. The STEM/EDS maps revealed a larger amount of Cu flow from the Cu-Sn side along the grain boundaries. The large Cu deposition on the grain boundaries might facilitate grain growth in Nb3Sn. Those findings make a novel contribution to the literature as they provide a deep insight into Nb3Sn phase formation via Hf doping.

Refinement of Nb3Sn grain size by the generation of ZrO2 precipitates in Nb3Sn wires

Unveiling the nucleation and growth of Zr oxide precipitates of internally oxidized Nb3Sn superconductors

X-Ray Absorption Spectroscopy to Investigate Precipitated Oxides in Nb 3 Sn Wires With an Internal Oxygen Source

Internally Oxidized Nb3Sn Strands with Fine Grain Size and High Critical Current Density

Thermodynamic route of Nb3Sn nucleation: Role of oxygen

Effect of Hf Addition to Nb on Nb 3 Sn Grain Morphology Under High Sn Diffusion Driving Force

Increased Electrical Conductivity In Fine-Grained (Zr,Hf)Nisn Based Thermoelectric Materials With Nanoscale Precipitates

Existing form of Nb in Zr-Sn-Nb-Fe alloys and its dependence on intermediate annealing

Preparation of One-Dimensional Diluted Magnetic Semiconducting Cr0.046zn0.954o and Properties Tuning with H-2 Atmospheric Annealing

Production of Nb-Zr alloy by aluminothermic reduction-electron beam refining 1st Report. Fundamental Study of Aluminothermic Reduction of Niobium Oxide and Zirconium Oxide.

In-depth S/TEM observation of Ti–Hf and Ta–Hf-doped Nb3Sn layers

Influence of Nb Alloying on Nb Recrystallization and the Upper Critical Field of Nb3Sn

Investigation on Microstructural Evolution and Hardening Mechanism in Dilute Zr–Nb Binary Alloys

Selective thermal evolution of native oxide layer in Nb and Nb3Sn-coated SRF grade Nb: An in-situ angular XPS study

Enhancement in the thermoelectric performance of ZrNiSn-based alloys through extra Zr-rich nanoprecipitates with superstructures

Optimization of Magnetic Stability in Nb3Sn Materials Near Stoichiometric Composition

Enhancement of the upper critical field of Nb3Sn utilizing disorder introduced by ball milling the elements

Beneficial influence of Hf and Zr additions to Nb4at.%Ta on the vortex pinning of Nb$_{3}$Sn with and without an O source

The effects of Nb addition on magnetic property of Nd10.23Pr2.56Fe68.32Co13.08B5.81 ribbons through modification of the intergranular phase and grain refinement

Direct production of the Nb-10%W-l%Zr-0.1%C alloys from the constituent metal oxides by the combined carbothermal reduction-electron beam melting method

Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications