Abstract:Nb3Sn has been widely used in high magnetic field facilities due to its excellent superconducting properties. Moreover, copper has become an indispensable constituent element in the fabrication of Nb3Sn superconductors. However, the role of copper in the formation of the Nb3Sn phase is still not thoroughly understood. In this work, Nb–Sn–Cu ternary samples with different molar ratios of copper were prepared by sintering elemental Nb, Sn and Cu mixed powders, and the effect of copper on the formation of the Nb3Sn phase was systematically investigated. It was found that the addition of copper had a significant effect on the formation of Nb3Sn. When the amount of added copper was small, the formation of the Nb3Sn phase was efficiently promoted with the aid of the liquid phase, and a high-purity sample of Nb3Sn could be formed by the transition from the Nb–Sn binary phases. However, at the same time, the bulk samples with a low ratio of copper possessed poor compactness due to the pressure build-up and tin burst generated by the liquid phase during heat treatment. With increasing copper content, the promotion effect became relatively weaker. More high melting temperature Cu–Sn phases were formed, and Nb3Sn was gradually formed by solid-state diffusion between Nb and the Cu–Sn matrix. Finally, it was found that the sample of Nb:Sn:Cu = 3:1:3 (mol. %) with a grain size of 70–120 nm possessed the highest critical current density due to its high phase purity and fine grain size of Nb3Sn.

Optimization of Magnetic Stability in Nb3Sn Materials Near Stoichiometric Composition

Phase Stability and Magnetic-Field-Induced Martensitic Transformation in Mn-Rich Nimnsn Alloys

Preparation, Magnetic and Transport Properties of Mn3Sn Single Crystal

Martensitic Transformation and Magnetocaloric Properties of Sn Doping Mn–Ni–Ga Alloys

Preparation and Magnetic Properties of Fe3+–Nb5+ Co-Doped SnO2

Nuclear Magnetic Resonance Investigation of Superconducting and Normal State Nb$_3$Sn

Magnetic properties and magnetostriction of ZnxNi 1-xMnSb alloys

Effect of Nb content on Sm2Fe17−xNbx and its nitrides prepared by reduction-diffusion method

Magnetic Properties and Magnetostriction of ZnxNi1-x MnSb Alloys

Effects of Sn addition on the microstructure and magnetic properties of MnBi bulk magnets

Martensitic transformation and magnetocaloric effect in Mn-Ni-Nb-Sn shape memory alloys: The effect of 4d transition-metal doping

Magnetic properties of Sn-substituted Ni-Zn ferrite:synthesized from nano-sized powders of NiO, ZnO, Fe2O3 and SnO2

The role of copper in the formation of the Nb3Sn superconducting phase

Composition-dependent phase transformation path involving 4O martensite in Ni–Mn–Sn magnetic shape memory alloys

A Review of the Properties of Nb3Sn and Their Variation with A15 Composition, Morphology and Strain State

Martensitic Transformation And Phase Stability Of In-Doped Ni-Mn-Sn Shape Memory Alloys From First-Principles Calculations

Effect of Ni/Sn Ratio on Martensitic Transformation and Magnetic Properties in High-Mn Content Mn2Ni1.64−xSn0.36+xferromagnetic Shape Memory Alloys

The Study of Negative Thermal Expansion and Magnetic Evolution in Antiperovskite Compounds Cu0.8-xSnxMn0.2NMn3(0 ≤ X ≤ 0.3)

Effects of Substitution of Zn for Ni in NiMnSb Alloys

Effect of Sn on elastic modulus and magnetic susceptibility of Zr-16Nb- x Ti ( x =4 wt%, 6 wt%) alloys

Effects of Sn substitution on structural and electrical properties of BaSn0.75M0.25O3-δ (M = Sc, In, Y, Gd, Nd⋯)