Abstract:Stabilized Li6.25La3Al0.25 Zr2O12 (cubic LLZO or c-LLZO) is a Li+-conducting ceramic with ionic conductivities approaching 1 mS-cm. Processing c LLZO so that it is suitable for use as a solid state electrolyte in all solid state batteries, however, is challenging due to the formation of secondary phases at elevated temperatures. The work described in this manuscript examines the formation of one such secondary phase La2Zr2O7 (LZO) formed during sintering c LLZO at 1000 °C. Specifically, spatially resolved Raman spectroscopy and X-ray Diffraction (XRD) measurements have identified gradients in Li distributions in the Li ion (Li+)-conducting ceramic Li6.25La3Al0.25 Zr2O12 (cubic LLZO or c-LLZO) created by thermal processing. Sintering c-LLZO under conditions relevant to solid state Li+ electrolyte fabrication conditions lead to Li+ loss and the formation of new phases. Specifically, sintering for 1 h at 1000 °C leads to Li+ depletion and the formation of the pyrochlore lanthanum zirconate (La2Zr2O7 or LZO), a material known to be both electronically and ionically insulating. Circular c-LLZO samples are covered on the top and bottom surfaces, exposing only the 1.6 mm-thick sample perimeter to the furnace's ambient air. Sintered samples show a radially symmetric LZO gradient, with more LZO at the center of the pellet and considerably less LZO at the edges. This profile implies that Li+ diffusion through the material is faster than Li+ loss through volatilization, and that Li+ migration from the center of the sample to the edges is not completely reversible. These conditions lead to a net depletion of Li+ at the sample center. Findings presented in this work suggest new strategies for LLZO processing that will minimize Li+ loss during sintering, leading to a more homogeneous material with more reproducible electrochemical behavior.

Deposition of La2Zr2O7 Film by Chemical Solution Deposition

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Formation and Rate Processes of Y2o3 Stabilized Zro2 Thin Films from Zr(Dpm)(4) and Y(Dpm)(3) by Cold-Wall Aerosol-Assisted Mocvd

Formation and Rate Processes of Y[sub 2]o[sub 3] Stabilized ZrO[sub 2] Thin Films from Zr(DPM)[sub 4] and Y(DPM)[sub 3] by Cold-Wall Aerosol-Assisted MOCVD

Synthesis of LaCrO3 films using spray pyrolysis technique

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Synthesis and Electrical Properties of Garnet-type Solid Oxide Electrolyte Thin Films from Solution Route

Growth of Thick La2Zr2O7 Buffer Layers for Coated Conductors by Polymer-Assisted Chemical Solution Deposition

Structure and conducting properties of La0.5Sr0.5CoO3−δ films on YSZ

Preparation Of Y2o3-Stabilized Zro2 Thin Electrolyte Films From Langmuir-Blodgett Film Precursors By Means Of Surface Ions

Characterization of La_(0.7)Ca_(0.3)Cr_(0.95)Zn_(0.05)O_(3-δ) and Preparation of Its Film

Preparation and Properties of ZrO2 and TiO2 Films and Their Nanolaminates by Atomic Layer Deposition

Fabrication and Characterization of La2Zr2O7 Films on Different Buffer Architectures for YBa2Cu3O7−δ Coated Conductors by RF Magnetron Sputtering

Pulsed laser deposition of conducting porous La-Sr-Co-O films

Formation Mechanism of Garnet-Like Li7La3Zr2O12 Powder Prepared by Solid State Reaction

Chemical Solution Deposition of Lamno3-Based Films for Coated Conductors

Metal Organic Deposition of Lanthanum Zirconate Buffer Layer on Biaxially Textured Ni-5%W Substrate

Lithium Volatilization and Phase Changes during Aluminum-Doped Cubic Li6.25La3Zr2Al0.25O12 (c-LLZO) Processing

N ew Class of Zr Precursor Containing Boratabenzene Ligand Enabling Highly Conformal Wafer-Scale Zirconium Dioxide Thin Films through Atomic Layer Deposition

Atomic Layer Deposition of Zinc Oxide Films: Effects of Nanocrystalline Characteristics on Tribological Performance