Abstract:Zirconium dioxide (ZrO2) is one of the ceramic materials with high potential in many areas of modern technologies. ZrO2 doped with 8 wt.% (~4.5 mol%) Y2O3 is a commercial powder used for obtaining stabilized zirconia materials (8 wt.% YSZ) with high temperature resistance and good ionic conductivity. During recent years it was reported the co-doping with multiple rare earth elements has a significant influence on the thermal, mechanical and ionic conductivity of zirconia, due complex grain size segregation and enhanced oxygen vacancies mobility. Different methods have been proposed to synthesize these materials. Here, we present the hydrothermal synthesis of 8 wt.% (~4.5 mol%) YSZ co-doped with 4, 6 and 8 wt.% La2O3, Nd2O3, Sm2O3 and Gd2O3 respectively. The crystalline phases formed during their thermal treatment in a large temperature range were analyzed by X-ray diffraction. The evolution of phase composition vs. thermal treatment temperatures shows as a major trend the formation at temperatures >1000 °C of a cubic solid solutions enriched in the rare earth oxide used for co-doping as major phase. The first results on the thermal conductivities and impedance measurements on sintered pellets obtained from powders co-doped with 8 wt.% Y and 6% Ln (Ln = La, Nd, Sm and Gd) and the corresponding activation energies are presented and discussed. The lowest thermal conductivity was obtained for La co-doped 8 wt.% YSZ while the lowest activation energy for ionic conduction for Gd co-doped 8 wt.% YSZ materials.

Synthesis of LaCrO3 films using spray pyrolysis technique

Formation and Rate Processes of Y2o3 Stabilized Zro2 Thin Films from Zr(Dpm)(4) and Y(Dpm)(3) by Cold-Wall Aerosol-Assisted Mocvd

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Formation and Rate Processes of Y[sub 2]o[sub 3] Stabilized ZrO[sub 2] Thin Films from Zr(DPM)[sub 4] and Y(DPM)[sub 3] by Cold-Wall Aerosol-Assisted MOCVD

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Optimization of molar concentrations for enhanced crystallinity and bandgap tuning of ZrO2 thin films via spray pyrolysis for advanced optical applications

Oxygen Transport in Oxide Thin Film Structures Oriented La[sub 0.5]sr[sub 0.5]coo[sub 3−x] on Single-Crystal Yttria-Stabilized Zirconia

Thulium and ytterbium-doped titanium oxide thin films deposited by ultrasonic spray pyrolysis

Hydrothermal Synthesis of Nanocrystalline ZrO2-8Y2O3-xLn2O3 Powders (Ln = La, Gd, Nd, Sm): Crystalline Structure, Thermal and Dielectric Properties

Synthesis of yttria-stabilized zirconia powders for plasma spray by internal gelation

The Effect of the Process Conditions on the Synthesis of Zirconium-Aluminum Oxide Thin Films Prepared by Ultrasonic Spray Pyrolysis

Effect of Calcination Temperature on the Microstructure, Composition and Properties of Agglomerated Nanometer CeO2-Y2O3-ZrO2 Powders for Plasma Spray-Physical Vapor Deposition (PS-PVD) and Coatings Thereof

Dynamics of Crystallization and Phase Transition in La0.5sr0.5coo3 Thin Films

Fabrication and Characterization of La0.6Sr0.4Co0.2Fe0.8O3-δ-Yttria Stabilized Zirconia Composites Cathode Prepared by Infiltration Method

Thermal decomposition and crystallization behavior of Yb/Y co-doped SrZrO3 precursor used in the suspension plasma spray process

Preparation of epitaxial yttria-stabilized zirconia with non-quilibrium t' phase and ferroelastic domain by pulsed laser deposition

The Growth and Phase Transitions of Epitaxial Pb(Zr0.95ti0.05)O-3 Thin Films Prepared by Sputter Deposition Combined with Post-Annealing on Srtio3(1 0 0)

Synergistic effects of ZrO2 and La2O3 on the phase stability and optical–electronic properties of Y2O3

Effects of co-precipitation temperature on structure and properties of La and Y doped cerium zirconium mixed oxides

Physical properties of La-doped ZnO thin films prepared by spray pyrolysis technique