Abstract:This work introduces a new approach of analyzing convective heat transfer in porous medium by considering the foam structure as a type of fin. It provides the resulting heat transfer characteristics for the design of a longitudinally flowed tube bundle reformer used for the Micro Gas Turbine Solid Oxide Fuel Cell (MGT-SOFC) hybrid process. Owing to a limited experimental database available in literature for the above-mentioned situation, a physical model is initially introduced for a channel flow configuration between two large flat plates using a commercial PDE solver. This model is then validated with experimental results available in literature. A comparison with theoretical solutions is also conducted. Later, this model is modified/adapted for a pipe flow configuration. The physical model for a channel with representative cross-section shape of a longitudinally flowed tube bundle is more complex and is therefore built in a commercial CFD-Solver. A comparative study of the heat transfer behavior in channels of different cross-sections is performed based on a new dimensionless correlation, whose physical coherence with fin efficiency is explained and mathematically proved. The applicability of the heat transfer correlation from one cross-sectional shape to the other are discussed. The proposed new treatment of the porous medium as a fin structure considerably simplifies the heat transfer analysis in porous medium by the clear physical meaning behind fin efficiency and Biot number. This relationship contributes to a better understanding of the heat heat transfer characteristics in porous media in contrast to the correlation between Nusselt number and Reynolds number. Furthermore, this correlation enables a direct comparison between foam structures of different parameters because the fin efficiency is always between 0 and 1. The strong physical background of new correlations also enhances the reliability and plausibility at characterizing and designing the metal foam for heat transfer enhancement.

Experimental Study of Boiling Heat Transfer Characteristics of Metal Foam Porous-wall Mini-channels

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

A Comparison of Metal-Foam Heat Exchangers to Compact Multilouver Designs for Air-Side Heat Transfer Applications

Numerical Study on Heat Transfer Performance of Vacuum Tube Solar Collector Integrated with Metal Foams

Experimental study on thermal and flow characteristics of metal foam heat pipe radiator

Experimental Investigation on Heat Transfer Phenomenon in Metal Foam Filled Tubes

Enhanced Thermal Performance of Internal Y-Shaped Bifurcation Microchannel Heat Sinks with Metal Foams

The Experimental Study of a Novel Metal Foam Heat Pipe Radiator

Experimental Study on the Thermal Performance of a Finned Metal Foam Heat Sink with Phase Change Material

Forced convection and heat transfer of water-cooled microchannel heat sinks with various structured metal foams

Experimental Investigation on Flow Condensation in Horizontal Tubes Filled with Annular Metal Foam

Comparison of convective heat transfer in metal foam-filled channels of three different cross-sections

Theoretical and Experimental Advances on Heat Transfer and Flow Characteristics of Metal Foams

Enhanced heat transfer performance of optimized micro-channel heat sink via forced convection in cooling metal foam attached on copper plate

Wall Heat Transfer Characteristic of Parallel-plate Channel Filled with Open-cell Metal Foams in Large Flow Velocity Range

Experimental Investigation of Heat Transfer Performance for a Novel Microchannel Heat Sink

Experimental Study Of Single Phase Flow In A Closed-Loop Cooling System With Integrated Mini-Channel Heat Sink

Experimental Investigation on Flow Boiling Heat Transfer of R134a in a Minichannel Heatsink with Copper Foam Fins

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Design and operating evaluation of a finned shell-and-tube thermal energy storage unit filled with metal foam

Experimental study of photothermal conversion of heat absorbers filled with metal foams of different pore densities