Abstract:We present the results of the measurements of the detection efficiency for a 4.7 \r{A} neutron beam incident upon a detector incorporating a stack of up to five MultiWire Proportional Counters (MWPC) with Boron-coated cathodes. The cathodes were made of Aluminum and had a surface exhibiting millimeter-deep V-shaped grooves of 45{\deg}, upon which the thin Boron film was deposited by DC magnetron sputtering. The incident neutrons interacting with the converter layer deposited on the sidewalls of the grooves have a higher capture probability, owing to the larger effective absorption film thickness. This leads to a higher overall detection efficiency for the grooved cathode when compared to a cathode with a flat surface. Both the experimental results and the predictions of the GEANT4 model suggests that a 5-counter detector stack with coated grooved cathodes has the same efficiency as a 7-counter stack with flat cathodes. The reduction in the number of counters in the stack without altering the detection efficiency will prove highly beneficial for large-area position-sensitive detectors for neutron scattering applications, for which the cost-effective manufacturing of the detector and associated readout electronics is an important objective. The proposed detector concept could be a technological option for one of the new chopper spectrometers and other instruments planned to be built at the future European Spallation Source in Sweden. These results with macrostructured cathodes generally apply not just to MWPCs but to other gaseous detectors as well.

A Multiwire Proportional Chamber for Precision Studies of Neutron Beta Decay Angular Correlations

Experimental Research on A Boron-Coated Multi-Wire Proportional Chamber Neutron Detector

Development of a multiwire proportional chamber with good tolerance to burst hits

Study and Application of Low Pressure Multi-Wire Proportional Chambers

Development Of Low Pressure Position Sensitive Multiwire Proportional Chamber

Performance Test of the Low-Pressure Thin Window Multi-Wire Chamber

A comprehensive study of rate capability in Multi-Wire Proportional Chambers

Study of A Multi-Wire Proportional Chamber with A Cathode Strip and Delay-Line Readout

Time resolution and characteristic study of MWPC detectors with different Argon based gas

An express monitoring procedure for low pressure MWPC efficiency value in heavy ion induced complete fusion nuclear reactions

GAS GAIN OF MULTI-WIRE PROPORTIONAL CHAMBERS

Study on Position Resolution of Low Pressure Multi-wire Proportional Chambers

The Study of Boron-Lined Honeycomb Neutron Detector with a Multi-Wire Proportional Chamber Readout

A 10B-based neutron detector with stacked Multiwire Proportional Counters and macrostructured cathodes

Performance Study of the Multi-purpose Time Projection Chamber (MTPC) Using a Four-Component Alpha Source

A Gas Monitoring Chamber for High Pressure Applications

Target Multiwire for the Fermilab Booster Neutrino Beamline

Front-end-Electronics for the SiPM-readout gaseous TPC for neutrinoless double beta decay search

A new gas-based proton-recoil telescope for quasi-absolute neutron flux measurements between 0.2 and 2 MeV neutron energy

Neutron spectroscopy with the Spherical Proportional Counter

Performance Study of a Directional Fast Neutron Detection System Based on TPC and Plastic Scintillation Detectors