Abstract:With the development of high-power laser technology, accurate measurement of laser power has been a difficult task. The light pressure weighing method (LPWM) can replace the calorimetric laser power meter as a standard measurement device in the high power range due to its fast response, high accuracy, and direct traceability to mass. When the laser power is less than 1 kW, the accurate measurement of light pressure requires a weighing sensor with a higher level of resolution, and multiple environmental disturbances will significantly affect the measurements. We present a high-precision LPWM power meter based on a W-shaped dual-reflection structure and a 1- resolution weighing sensor, corresponding to a laser power measurement resolution of 0.78 W. Simulation of air parameters near the sensing mirror shows that the laser causes different air pressure changes at the top and bottom of the sensing mirror, and monitoring of temperature, relative humidity and laser power all show linear trends. By using the segmented compensation strategy, we successfully achieve more stable measurements and significantly improve the level of measurement repeatability. The expanded uncertainty after compensation is better than 2% for laser power above 150 W and better than 1% for power above 500 W. This article makes it possible to quickly and accurately measure laser power from 150 W to 1 kW in conventional environments and is also expected to replace calorimetry as the standard device in the sub-kilowatt range.

Study on Position Resolution of Low Pressure Multi-wire Proportional Chambers

Study and Application of Low Pressure Multi-Wire Proportional Chambers

Development Of Low Pressure Position Sensitive Multiwire Proportional Chamber

Performance Test of the Low-Pressure Thin Window Multi-Wire Chamber

Study of A Multi-Wire Proportional Chamber with A Cathode Strip and Delay-Line Readout

Experimental Research on A Boron-Coated Multi-Wire Proportional Chamber Neutron Detector

Development of high position resolution parallel plate avalanche chambers

A Multiwire Proportional Chamber for Precision Studies of Neutron Beta Decay Angular Correlations

Time resolution and characteristic study of MWPC detectors with different Argon based gas

A comprehensive study of rate capability in Multi-Wire Proportional Chambers

A Gas Monitoring Chamber for High Pressure Applications

Study on the Position Resolution of Resistive Plate Chamber

Pressure Measurement Based on Multi-Waves Fusion Algorithm

An express monitoring procedure for low pressure MWPC efficiency value in heavy ion induced complete fusion nuclear reactions

GAS GAIN OF MULTI-WIRE PROPORTIONAL CHAMBERS

Static Characteristic Calibration of Wire Position Sensorfor Position Monitoring in Particle Accelerator

Study on the Performance of Large Area Mrpc with High Position Resolution

Trigger circuit of data acquisition system in particle track system and its position resolution

BPM Design and Test Result of Xi'an Proton Application Facility

Achieving 1-μg Weighing Resolution of Light Pressure by Drift Analysis and Compensation for Precision Sub-Kilowatt Laser Power Measurement

Development of a multiwire proportional chamber with good tolerance to burst hits