Abstract:We present the results of the measurements of the detection efficiency for a 4.7 \r{A} neutron beam incident upon a detector incorporating a stack of up to five MultiWire Proportional Counters (MWPC) with Boron-coated cathodes. The cathodes were made of Aluminum and had a surface exhibiting millimeter-deep V-shaped grooves of 45{\deg}, upon which the thin Boron film was deposited by DC magnetron sputtering. The incident neutrons interacting with the converter layer deposited on the sidewalls of the grooves have a higher capture probability, owing to the larger effective absorption film thickness. This leads to a higher overall detection efficiency for the grooved cathode when compared to a cathode with a flat surface. Both the experimental results and the predictions of the GEANT4 model suggests that a 5-counter detector stack with coated grooved cathodes has the same efficiency as a 7-counter stack with flat cathodes. The reduction in the number of counters in the stack without altering the detection efficiency will prove highly beneficial for large-area position-sensitive detectors for neutron scattering applications, for which the cost-effective manufacturing of the detector and associated readout electronics is an important objective. The proposed detector concept could be a technological option for one of the new chopper spectrometers and other instruments planned to be built at the future European Spallation Source in Sweden. These results with macrostructured cathodes generally apply not just to MWPCs but to other gaseous detectors as well.

Time resolution and characteristic study of MWPC detectors with different Argon based gas

Experimental Research on A Boron-Coated Multi-Wire Proportional Chamber Neutron Detector

A comprehensive study of rate capability in Multi-Wire Proportional Chambers

A high rate and high timing photoelectric detector prototype with RPC structure

Study and Application of Low Pressure Multi-Wire Proportional Chambers

A 10B-based neutron detector with stacked Multiwire Proportional Counters and macrostructured cathodes

Study of A Multi-Wire Proportional Chamber with A Cathode Strip and Delay-Line Readout

Studies of the effect of rate on gain for straw tube detector

A Multiwire Proportional Chamber for Precision Studies of Neutron Beta Decay Angular Correlations

Development Of Low Pressure Position Sensitive Multiwire Proportional Chamber

Readout of the time signals of the MWPC detector with boron sensitive thermal neutron

Characterization of a gaseous time projection chamber with an internal \ce{^{37}Ar} source

Performance Test of the Low-Pressure Thin Window Multi-Wire Chamber

Characterization of a gaseous time projection chamber with an internal ^37Ar source

DMTPC: A dark matter detector with directional sensitivity

Influence of the Working Gas Properties on the Anode Wire Modulation Effect of MWPC

Development of a time of flight spectrometer based on position sensitive multi-wire proportional counters for fission fragment mass distribution studies

Characterization of a Spherical Proportional Counter in argon-based mixtures

Development of Multi-gap Resistive Plate Chamber (MRPC) for medical imaging

Development and characterization of a slow wavelength shifting coating for background rejection in liquid argon detectors

Design and commissioning of a 600 L Time Projection Chamber with Microbulk Micromegas