Abstract:We present the results of the measurements of the detection efficiency for a 4.7 \r{A} neutron beam incident upon a detector incorporating a stack of up to five MultiWire Proportional Counters (MWPC) with Boron-coated cathodes. The cathodes were made of Aluminum and had a surface exhibiting millimeter-deep V-shaped grooves of 45{\deg}, upon which the thin Boron film was deposited by DC magnetron sputtering. The incident neutrons interacting with the converter layer deposited on the sidewalls of the grooves have a higher capture probability, owing to the larger effective absorption film thickness. This leads to a higher overall detection efficiency for the grooved cathode when compared to a cathode with a flat surface. Both the experimental results and the predictions of the GEANT4 model suggests that a 5-counter detector stack with coated grooved cathodes has the same efficiency as a 7-counter stack with flat cathodes. The reduction in the number of counters in the stack without altering the detection efficiency will prove highly beneficial for large-area position-sensitive detectors for neutron scattering applications, for which the cost-effective manufacturing of the detector and associated readout electronics is an important objective. The proposed detector concept could be a technological option for one of the new chopper spectrometers and other instruments planned to be built at the future European Spallation Source in Sweden. These results with macrostructured cathodes generally apply not just to MWPCs but to other gaseous detectors as well.

Target Multiwire for the Fermilab Booster Neutrino Beamline

Development of fiber beam loss monitor based on Cerenkov principle

Progress on an Electron Beam Profile Monitor at the Fermilab Main Injector

Beam Based RF Voltage Measurements and Longitudinal Beam Tomography at the Fermilab Booster

Target, magnetic horn and safety studies for the CERN to Frejus Super Beam

Commissioning and first results of the Electron Beam Profiler in the Main Injector at Fermilab

Upgrade of the Diagnostic Neutral Beam Injector for the RFX-mod2 experiment

An Instrument for Precision Controlled Radiation Exposures, Charged Beam Profile Measurement, and Real-time Fluence Monitoring Beyond $10^{16}$ n$_{\textrm{eq}}$/cm$^{2}$

The XBPF, a new multipurpose scintillating fibre monitor for the measurement of secondary beams at CERN

Design and test of a compact beam current monitor based on a passive RF cavity for a proton therapy linear accelerator

Development of a machine protection system for the Superconducting Beam Test Facility at Fermilab

Performance evaluation of electron multiplier tubes as a high-intensity muon beam monitor of accelerator neutrino experiments

Preliminary experimental results of tungsten wire calorimeter for CRAFT NNBI

Beam Tests of SNSPDs with 120 GeV Protons

Design of the LBNF Beamline Target Station

A prototype scintillating fibre beam profile monitor for Ion Therapy beams

Vibrating wires for beam diagnostics

A 10B-based neutron detector with stacked Multiwire Proportional Counters and macrostructured cathodes

Neutron spectroscopy for Boron Neutron Capture Therapy beams characterization

Initial PIP-II Beam Current Monitor Fault Case Analyses & Beam Position Monitor Linearity Studies in CST Studio Suite