Abstract:Objective: Very High Energy Electrons (VHEE) in the range of 50-250 MeV are of interest for treating deep-seated tumours with FLASH radiotherapy. This approach offers favourable dose distributions and the ability to deliver ultra-high dose rates (UHDR) efficiently. To make VHEE-based FLASH treatment clinically viable, a novel beam monitoring technology is explored as an alternative to transmission ionisation monitor chambers, which have non-linear responses at UHDR. This study introduces the Fibre Optic FLASH Monitor (FOFM), which consists of an array of silica optical fibre-based Cherenkov sensors with a photodetector for signal readout. Approach: Experiments were conducted at the CLEAR facility at CERN using 200 MeV and 160 MeV electrons to assess the FOFM's response linearity to UHDR (characterised with radiochromic films) required for FLASH radiotherapy. Beam profile measurements made on the FOFM were compared to those using radiochromic film and scintillating Yttrium Aluminium Garnet (YAG) screens. Main Results: A range of photodetectors were evaluated, with a Complementary-Metal-Oxide-Semiconductor (CMOS) camera being the most suitable choice for this monitor. The FOFM demonstrated excellent response linearity from 0.9 Gy/pulse to 57.4 Gy/pulse (R2 = 0.999). Furthermore, it did not exhibit any significant dependence on the energy between 160 MeV and 200 MeV nor the instantaneous dose rate. Gaussian fits applied to vertical beam profile measurements indicated that the FOFM could accurately provide pulse-by-pulse beam size measurements, agreeing within <9% and <3% of radiochromic film and YAG screen measurements, respectively. Significance: The FOFM proves to be a promising solution for real-time beam profile and dose monitoring for UHDR VHEE beams, with a linear response in the UHDR regime. Additionally it can perform pulse-by-pulse beam size measurements, a feature currently lacking in transmission ionisation monitor chambers, which may become crucial for implementing FLASH radiotherapy and its associated quality assurance requirements.

A prototype scintillating fibre beam profile monitor for Ion Therapy beams

A prototype scintillating fibre beam profile monitor for Ion Therapy beams

A Beam Monitor for Ion Beam Therapy Based on HV-CMOS Pixel Detectors

Microstructured plastic scintillators for pencil beam profiling in proton-therapy accelerators

An in-vivo treatment monitoring system for ion-beam radiotherapy based on 28 Timepix3 detectors

A fast plastic scintillator for low intensity proton beam monitoring

Design and test of a compact beam current monitor based on a passive RF cavity for a proton therapy linear accelerator

Characterization and performances of a monitoring ionization chamber dedicated to IBA-universal irradiation head for Pencil Beam Scanning

Characterization of a Low-Cost Plastic Fiber Array Detector for Proton Beam Dosimetry

Microstructured Plastic Scintillators For Beam Profiling In Medical Accelerators

Design of a new tracking device for on-line dose monitor in ion therapy

Monolithic HV-CMOS sensors for a beam monitoring system of therapeutic ion beams

A Multi-Point Optical Fibre Sensor for Proton Therapy

Development of a novel fibre optic beam profile and dose monitor for very high energy electron radiotherapy at ultrahigh dose rates

First Tests of the I-BEAT Detector as Primary Monitor for Target Normal Sheath Accelerated Protons

The XBPF, a new multipurpose scintillating fibre monitor for the measurement of secondary beams at CERN

A Prototype Scintillator Real-Time Beam Monitor for Ultra-high Dose Rate Radiotherapy

Three dimensional reconstruction of therapeutic carbon ion beams in phantoms using single secondary ion tracks

A beam intensity monitor for the Loma Linda cancer therapy proton accelerator

Geometrical Characterization of an Inorganic Scintillator Detector for Proton Therapy Using a Micrometer-Scale Ion Beam

The SiFi-CC detector for beam range monitoring in proton therapy -- characterization of components and a prototype detector module