Abstract:The anisotropy of the critical current density (Jc) and its influence on measurement of irreversibility field (Birr) has been investigated for high quality, in-situ MgB2 strands. Comparison of transport and magnetization measurements has revealed the onset of a regime where large differences exist between transport and magnetically measured values of the critical current density and Birr. These effects, initially unexpected due to the lack of crystalline texture in these in-situ processed strands, appear to be due to a fibrous microstructure, connected with the details of the wire fabrication and MgB2 formation reactions. Scanning electron micrographs of in-situ-processed MgB2 monocore strands have revealed a fibrous microstructure. Grains (~100 nm) are randomly oriented, and there is no apparent local texture of the grains. However, this randomly oriented polycrystalline material has a fibrous texture at a larger length scale, with stringers of MgB2 (~ 60 {\mu}m long and ~5 {\mu}m in diameter) partially separated by elongated pores -- the spaces previously occupied by stringers of elemental Mg. This leads to an interpretation of the differences observed in transport and magnetically determined critical currents, in particular a large deviation between the two at higher fields, in terms of different transverse and longitudinal connectivities within the strand. The different values of connectivity also lead to different resistive transition widths, and thus irreversibility field values, as measured by transport and magnetic techniques. Finally, these considerations are seen to influence estimated pinning potentials for the strands.

Large irreversibility field in nanoscale C-doped MgB2/Fe tape conductors

Enhancement of the Critical Current Density and the Irreversibility Field in Maleic Anhydride Doped MgB2 Based Tapes

Effect of Nano-C Doping on the In-Situ Processed MgB2 Tapes

Effect of the processing parameters of MgB1.8(SiC)0.1/Fe tapes on the critical current density

The doping effect of multiwall carbon nanotube on MgB2/Fe superconductor wire

The Effect of Zrsi2 and Sic Doping on the Microstructure and J(C)-B Properties of Pit Processed Mgb2 Tapes

Transport Critical Current Density of Fe Sheath Mgb2 Tapes Sintered at Different Temperatures

Effect Of Nanoscale C And Sic Doping On The Superconducting Properties Of Mgb2 Tapes

Effect of grain refinement on enhancing critical current density and upper critical field in undoped MgB2 ex-situ tapes

Strongly enhanced critical current density in Fe-sheathed MgB2 tapes by stearic acid and stearate doping

Fabrication and Superconducting Properties of Nano-Sic Doped MgB 2 Tapes

Strongly Enhanced Critical Current Density in Mgb2/Fe Tapes by Stearic Acid and Stearate Doping

Enhanced High-Field Performance in Fe-sheathed MgB2 Tapes Using Inexpensive Stearic Acid Additives

Superconducting properties of MgB2 wires and tapes with different metal sheaths

Comparative Studies of Nanoscale SiC Whisker and Si/N/C Doped MgB2 Tapes

Nanoscale-SiC doping for enhancing Jc and Hc2 in the Superconducting MgB2

Significant Improvements of the High-Field Properties of Carbon-Doped MgB2 Films by Hot-Filament-assisted Hybrid Physical–chemical Vapor Deposition Using Methane As the Doping Source

Systematic effects of carbon doping on the superconducting properties of Mg(B$_{1-x}$C$_x$)$_2$

High transport critical current density obtained for Powder-In-Tube-processed MgB2 tapes and wires using stainless steel and Cu-Ni tubes

Clean limit MgB_2 films with ultrahigh current carrying capability and carbon-doped MgB_2 films with extremely high upper critical field

Anisotropic Connectivity and its Influence on Critical Current Densities, Irreversibility Fields, and Flux Creep in In-Situ-Processed MgB2 Strands