Abstract:The MgB2 coated superconducting tapes have been fabricated on textured Cu (0 0 1) and polycrystalline Hastelloy tapes using coated conductor technique, which has been developed for the second generation high temperature superconducting wires. The MgB2/Cu tapes were fabricated over a wide temperature range of 460-520 °C by using hybrid physical-chemical vapor deposition (HPCVD) technique. The tapes exhibited the critical temperatures (Tc) ranging between 36 and 38 K with superconducting transition width (\DeltaTc) of about 0.3-0.6 K. The highest critical current density (Jc) of 1.34 \times 105 A/cm2 at 5 K under 3 T is obtained for the MgB2/Cu tape grown at 460^{\circ}C. To further improve the flux pinning property of MgB2 tapes, SiC is coated as an impurity layer on the Cu tape. In contrast to pure MgB2/Cu tapes, the MgB2 on SiC-coated Cu tapes exhibited opposite trend in the dependence of Jc with growth temperature. The improved flux pinning by the additional defects created by SiC-impurity layer along with the MgB2 grain boundaries lead to strong improvement in Jc for the MgB2/SiC/Cu tapes. The MgB2/Hastelloy superconducting tapes fabricated at a temperature of 520 °C showed the critical temperatures ranging between 38.5 and 39.6 K. We obtained much higher Jc values over the wide field range for MgB2/Hastelloy tapes than the previously reported data on other metallic substrates, such as Cu, SS, and Nb. The Jc values of Jc(20 K, 0 T) \sim5.8 \times 106 A/cm2 and Jc(20 K, 1.5 T) ~2.4 \times 105 A/cm2 is obtained for the 2-\mum-thick MgB2/Hastelloy tape. This paper will review the merits of coated conductor approach along with the HPCVD technique to fabricate MgB2 conductors with high Tc and Jc values which are useful for large scale applications.

Strongly Enhanced Critical Current Density in Mgb2/Fe Tapes by Stearic Acid and Stearate Doping

Strongly enhanced critical current density in Fe-sheathed MgB2 tapes by stearic acid and stearate doping

Enhanced High-Field Performance in Fe-sheathed MgB2 Tapes Using Inexpensive Stearic Acid Additives

Enhancement of the Critical Current Density and the Irreversibility Field in Maleic Anhydride Doped MgB2 Based Tapes

The Effect of Zrsi2 and Sic Doping on the Microstructure and J(C)-B Properties of Pit Processed Mgb2 Tapes

Influence of Sintering Temperature on the Superconducting Properties of Zn-stearate-doped MgB2tapes

Effect Of Nanoscale C And Sic Doping On The Superconducting Properties Of Mgb2 Tapes

Strong influence of precursor powder on the critical current density of Fe-sheathed MgB2 tapes

Effect of Nano-C Doping on the In-Situ Processed MgB2 Tapes

Influence of Maleic Acid Doping on the Superconducting Properties of MgB_2 Tapes

Effect of the processing parameters of MgB1.8(SiC)0.1/Fe tapes on the critical current density

Fabrication and Superconducting Properties of Nano-Sic Doped MgB 2 Tapes

Influence of Oxygen Contents of Carbohydrate Dopants on Connectivity and Critical Current Density in Mgb2 Tapes

High transport critical current density obtained for Powder-In-Tube-processed MgB2 tapes and wires using stainless steel and Cu-Ni tubes

MgB2 coated superconducting tapes with high critical current densities fabricated by hybrid physical-chemical vapor deposition

Comparative Studies of Nanoscale SiC Whisker and Si/N/C Doped MgB2 Tapes

Strongly enhanced current densities in Sr0.6K0.4Fe2As2 superconducting tapes

Significant Improvements of the High-Field Properties of Carbon-Doped MgB2 Films by Hot-Filament-assisted Hybrid Physical–chemical Vapor Deposition Using Methane As the Doping Source

Transport Critical Current Density of Fe Sheath Mgb2 Tapes Sintered at Different Temperatures

Superconducting properties of MgB2 wires and tapes with different metal sheaths

Strong enhancement of critical current density in MgB2 superconductor using carbohydrate doping