Abstract:In the pharmaceutical, fine chemical, polymer and food industry, where high value-added products are manufactured, insufficient control might produce off-grade products. This can cause significant financial losses, or in the pharmaceutical industry, it can result in an unusable batch. In these industries, batch reactors are commonly used for the manufacturing of intermediate and final products. The control of these reactors is essentially a problem of temperature control. In the industry, an increasing number of heating–cooling systems utilizing three different temperature levels can be found. Although they are advantageous from an economic point of view, it makes the control more complicated. A pilot unit of such a system can be found in the authors’ laboratory, which contains a monofluid thermoblock with three different temperature levels. It is a useful experimental facility to test control algorithms for industrial use. This paper describes a split-range algorithm that can be used as part of the jacket temperature controller in the case of a thermoblock containing three different temperature levels. The main problem from the control point of view is that the sign of the gain of the controlled object changes depending on the relation of the jacket and the actual feed temperature of the jacket recirculation loop. The main purpose of the split-range algorithm is to maintain the sign of the gain of the controlled object unchanged, thus avoiding control instability. This solution ensures that the controller utilizes all three temperature levels, especially the medium level with lower energy consumption. The algorithm was tested with simulation, and for the jacket temperature controller, a constrained PI controller was used. The parameters of the controller were identified by numerical optimization. The resulting jacket temperature controller extended with the split-range algorithm was validated on the pilot system. The same set-point profile was used for simulation and for the test measurement; this was designed to cover the entire temperature range of the system and to contain drastic changes, constant and ramped sections. Both in the case of simulation and the test measurement, good control performance was achieved; the controlled variable followed the set-point with small error both in the case of ramped and constant set-points.

Optimal temperature profiles for tubular reactors implemented through a flow reversal strategy

Derivation of generic optimal reference temperature profiles for steady-state exothermic jacketed tubular reactors

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

Optimal Process Design for Recovering Effluent Gas at Subambient Temperature

CFD Simulation of Shear Flow and Mixing in a Taylor–Couette Reactor with Variable Cross-Section Inner Cylinders

Phase Shift Mechanism of Pulse Tube Cooler Based on Fluid Network Theory

Structure effect of industrial loop reactors on non-uniform flow characteristics

A Minimum Entropy Production Approach to Optimization of Tubular Chemical Reactors with Nature-Inspired Design

Global optimization for the design of shell and tube horizontal thermosyphon reboiler

Temperature control strategy for safer and heat-efficient operations in a catalytic flow reactor

Experimental modeling to design a heat exchanger control strategy for a Fischer–Tropsch fluidized bed

Analysis of configurational factors that influence the reversibility of nonstoichiometric countercurrent thermal reduction reactors

Natural convective heat transfer analysis of a vertical tapered inner annulus tube with dual inverted frusto-conical turbulator using CFD

Effect of process design on the open-loop behavior of a jacketed exothermic CSTR

Thermal-Hydraulic Performance and Optimization of Tube Ellipticity in a Plate Fin-And-Tube Heat Exchanger

Quantitative Comparison of Temperature Control of Reactors with Jacket Cooling or Internal Cooling Coils

Jacket Temperature Control of a Batch Reactor Using Three Different Temperature Levels

Gas–Liquid Flow Characteristics and Performance Optimization of Industrial Downflow Jet Loop Reactor Based on Computational Fluid Dynamics

Topological optimization for tailored designs of advection-diffusion-reaction porous reactors based on pore scale modeling and simulation

Developing an algorithm to evaluate the tube and baffle choice influences on enhancing the hydrothermal performances of shell and tube heat exchangers