Abstract:In the pharmaceutical, fine chemical, polymer and food industry, where high value-added products are manufactured, insufficient control might produce off-grade products. This can cause significant financial losses, or in the pharmaceutical industry, it can result in an unusable batch. In these industries, batch reactors are commonly used for the manufacturing of intermediate and final products. The control of these reactors is essentially a problem of temperature control. In the industry, an increasing number of heating–cooling systems utilizing three different temperature levels can be found. Although they are advantageous from an economic point of view, it makes the control more complicated. A pilot unit of such a system can be found in the authors’ laboratory, which contains a monofluid thermoblock with three different temperature levels. It is a useful experimental facility to test control algorithms for industrial use. This paper describes a split-range algorithm that can be used as part of the jacket temperature controller in the case of a thermoblock containing three different temperature levels. The main problem from the control point of view is that the sign of the gain of the controlled object changes depending on the relation of the jacket and the actual feed temperature of the jacket recirculation loop. The main purpose of the split-range algorithm is to maintain the sign of the gain of the controlled object unchanged, thus avoiding control instability. This solution ensures that the controller utilizes all three temperature levels, especially the medium level with lower energy consumption. The algorithm was tested with simulation, and for the jacket temperature controller, a constrained PI controller was used. The parameters of the controller were identified by numerical optimization. The resulting jacket temperature controller extended with the split-range algorithm was validated on the pilot system. The same set-point profile was used for simulation and for the test measurement; this was designed to cover the entire temperature range of the system and to contain drastic changes, constant and ramped sections. Both in the case of simulation and the test measurement, good control performance was achieved; the controlled variable followed the set-point with small error both in the case of ramped and constant set-points.

Quantitative Comparison of Temperature Control of Reactors with Jacket Cooling or Internal Cooling Coils

A New Nonlinear Optimal Control Design Approach for a Chemical Reactor

Dynamics and Control Designs for Internal Thermally Coupled Distillation Columns with Different Purities, Part 2: Close Loop Analysis and Control Designs

Dynamics and Control of High Purity Heat Integrated Distillation Columns

Control Schemes of Internal Thermally Coupled Distillation Columns for Non-Ideal Mixtures

Adaptive Temperature Control for Distillation Columns Based on Relative Stability in the Profile Pattern

Immersion and Invariance Adaptive Control of a Class of Continuous Stirred Tank Reactors

Effect of process design on the open-loop behavior of a jacketed exothermic CSTR

Derivation of generic optimal reference temperature profiles for steady-state exothermic jacketed tubular reactors

Comparison of Temperature Difference Measurement Technologies Used in Vehicular Heat Exchangers

Dynamic Optimization of Multivariable Endothermic Reaction in Cascade CSTR

Control of nonlinear jacketed continuous stirred tank reactor using different control structures

Comparison of Two Types of Control Structures for Benzene Chlorine Reactive Distillation Systems

A robust control scheme for nonlinear non-isothermal uncertain jacketed continuous stirred tank reactor

Adaptive Temperature Control of Multiproduct Jacketed Reactors

Comprehensive Comparison of the Applicability of Internally Ribbed and Microfin Tubes for TORC Systems

Comparison Between Passive Reactor Cavity Cooling Systems Based on Atmospheric Radiation and Atmospheric Natural Circulation

Jacket Temperature Control of a Batch Reactor Using Three Different Temperature Levels

Analysis of configurational factors that influence the reversibility of nonstoichiometric countercurrent thermal reduction reactors

Optimization of Hot Gas Chamber in High Temperature Reactor

Optimal temperature profiles for tubular reactors implemented through a flow reversal strategy