Abstract:The catalytic combustion has the advantage of lower auto-ignition temperature and helps to expand the combustible limit of lean premixed gas. However, the intake needs to be preheated to certain temperature commonly through an independent heat exchanger. Similar to the principles of non-catalytic RTO combustion, this paper presents a similar approach whereby the combustion chamber is replaced by a catalytic combustion bed. A new catalytic reactor integrated with a heat recuperator is designed to enhance the heat recirculation effect. Using a two-dimensional computational fluid dynamics model, the performance of the reactor is studied. The reaction performances of the traditional and compact reactors are compared and analyzed. Under the same conditions, the compact reactor has better reaction performance and heat recirculation effect, which can effectively decrease the ignition temperature of feed gas. The influences of the inlet velocity, the inlet temperature, the methane concentration, and the thermal conductivity of porous media on the reaction performance of integrated catalytic reactor are studied. The results show that the inlet velocity, inlet temperature, methane concentration, and thermal conductivity of porous media materials have important effects on the reactor performance and heat recirculation effect, and the thermal conductivity of porous media materials has the most obvious influence. Moreover, the reaction performance of multiunit integrated catalytic reactor is studied. The results show that the regenerative effect of multiunit integrated catalytic reactor is further enhanced. This paper is of great significance to the recycling of low calorific value gas energy and relieving energy stress in the future.

Analysis of configurational factors that influence the reversibility of nonstoichiometric countercurrent thermal reduction reactors

Numerical Analysis of Heat Transfer Characteristics of a Falling Film Type Plate-Fin Condenser/Reboiler

An Improved Form of Shrinking Core Model for Prediction of the Conversion During Reduction Process in Chemical Looping Combustion

Modelling and simulation for adiabatic fixed-bed reactor with flow reversal

Effect of Periodic Variation of the Inlet Concentration on the Performance of Reverse Flow Reactors

Thermally coupled catalytic hydrogen combustion-reverse water gas shift reactor: Model-based feasibility study and parametric analysis

Syngas Chemical Looping Process: Dynamic Modeling of a Moving‐bed Reducer

Optimal temperature profiles for tubular reactors implemented through a flow reversal strategy

Modelling and analysis of an endothermic reacting counter-current flow

Response of reverse flow reactor to periodic inlet concentration varaition

Suudy on the behaviors of unsteady-state fixed-bed reactor with flow reversal

Quantitative Comparison of Temperature Control of Reactors with Jacket Cooling or Internal Cooling Coils

A Reduced Fidelity Model for the Rotary Chemical Looping Combustion Reactor

Optimization and Safety Analysis for CO Oxidative Coupling Reactor with Co-Current Thermal Management

Thermodynamic Analysis on Theoretical Models of Cycle Combined Heat Exchange Process: the Reversible Heat Exchange Process

Managing Temperature Uniformity of Thermally Integrated Micro Reformers with Different Axial Dimensions: A Detailed Numerical Study

Design and Performance Investigation of a Compact Catalytic Reactor Integrated with Heat Recuperator

Modeling of Reverse-Flow Reactor for VOC Incineration with Account of Reversible Adsorption: The Way to Minimize the Negative Influence of Desorption Phenomena

Numerical analysis of multiphase flow in chemical looping reforming process for hydrogen production and CO2 capture

Numerical Study on Dynamic Performance of Low Temperature Recuperator in a S-CO 2 Brayton Cycle

Irreversibility Analysis of a Recuperative Heater During Undergoing the Flowrate Impulsive Disturbance Transient Processes