Abstract:UNLABELLED:A general model has been developed for analyzing the removal of volatile organic compounds (VOCs) by photocatalytic oxidation (PCO) reactors, taking into consideration of the photocatalytic (surface) reaction and the convective mass transfer coefficients including allowance for their spatial dependence. On this basis, a novel insight into VOC removal performance of PCO reactors is presented. The key parameter for evaluating PCO reactor VOC removal performance is the number of the mass transfer unit (NTU(m)), which is shown to be a simple linear product of three dimensionless parameters: the ratio of the reaction area to the cross-sectional area of the flow channel (A*), the Stanton number of mass transfer (St(m)), and the reaction effectiveness (eta). The A* represents the geometric and structural characteristic of a PCO reactor. The St(m) shows the synergistic degree of alignment between the fluid and mass flow fields, and reflects the convective mass transfer rate of the reactor. The eta, describes the relative intensity between the PCO reaction rate and the mass transfer rate. By using the relationship and the parameters, the influence of various factors on the VOC removal performance, the bottleneck for improving the performance and design of a PCO reactor can be determined. Three examples are used to illustrate the application of our proposed model. It is found that the VOC removal bottleneck is the reaction rate for honeycomb type reactor, while mass transfer rate for light-in-tube type reactor. With six fins the fractional conversion of a light-in-tube reactor increases about 70% relative to the one without any fins.PRACTICAL IMPLICATIONS:Indoor air quality problem caused by volatile organic compounds (VOCs) have annoyed people for many years. Photocatalytic oxidation (PCO) appears to be a promising technique for destroying VOCs in indoor air. With the model and the novel insight presented in this paper, the influence of various factors on the VOC removal performance can be determined. And the bottleneck for improving the performance of a PCO reactor can be easily identified. These are helpful for designing high performance PCO reactors and optimizing their operative performance.

Modeling of Reverse-Flow Reactor for VOC Incineration with Account of Reversible Adsorption: The Way to Minimize the Negative Influence of Desorption Phenomena

Control of a reverse flow reactor for VOC combustion

Novel Insight into VOC Removal Performance of Photocatalytic Oxidation Reactors.

Reconfiguring closed-loop desorption for industrial solvent recycling by retaining post-condensation volatile organic compounds

Research of VOCs Clearance Device Based on Adsorption Catalysis Techniques

Dynamic Study of VSA and TSA Processes for VOCs Removal from Air

Experimental validation of adsorption filter model under dynamic VOC concentrations: Prediction of long-term efficiency

Modeling of a Rotary Adsorber for Continuous Capture of Indoor Carbon Dioxide

Low-temperature catalysis for VOCs removal in technology and application: A state-of-the-art review

MODEL OF VOCs REMOVAL PERFORMANCE OF PHOTOCATALYTIC OXIDATION REACTORS

Optimization and Simulation Analysis of Furnace Structure for Regenerative Thermal Oxidizer

Advanced Technologies for Volatile Organic Compound (VOC) Emission Treatment: An Overview

A control strategy of flow reversal with hot gas withdrawal for heat recovery and its application in mitigation and utilization of ventilation air methane in a reverse flow reactor

An Improved Model for Analyzing the Performance of Photocatalytic Oxidation Reactors in Removing Volatile Organic Compounds and Its Application

Dynamic Model Validation and Simulation of Acetone-Toluene and Benzene-Toluene Systems for Industrial Volatile Organic Compound (VOC) Abatement

Recent advances in VOC elimination by catalytic oxidation technology onto various nanoparticles catalysts: a critical review

Improved model for analyzing the performance of photocatalytic oxidation reactor in removing volatile organic compounds and its application

Process Modeling and Exergy Analysis for a Typical VOC Thermal Conversion Plant

Modeling of ternary mixture of VOCs in photocatalytic oxidation reactor for indoor air quality application

Modelling and simulation for adiabatic fixed-bed reactor with flow reversal

A model for analyzing the performance of photocatalytic air cleaner in removing volatile organic compounds