Abstract:Abstract As one of the proposed six types of Gen-IV nuclear energy systems, lead-cooled fast reactor (LFR) has some advantages in safety, economy, sustainability, and proliferation prevention. With its low melting point, chemical inertia, high boiling point temperature, pretty good neutronics and γ shielding ability, lead bismuth eutectic (LEB) has been one of the common choices of lead-base coolant for fast reactors. A certain natural circulation capacity might be achieved in LBE flow systems due to its relatively high thermal expansion and thus induced buoyancy. Consequently, for the purpose of enhancing natural safety performance and operation economy, as well as for other specific needs, natural circulation is, in recent years, considered for the main heat transmission system or residual heat removal systems in some LBE fast reactor designs. Study of LBE natural circulation along with its heat transmission performance is thus of quite significance for LBE natural circulation fast reactor design and natural safety performance improvement. In this paper, steady-state flow and heat transmission characteristics and behaviors of LBE natural circulation, as well as those of other coolant media (sodium and water), are theoretically and comparatively studied. Meanwhile, based on both the steady and transient natural circulation experiments on the LBE natural circulation test facility, namely, LNC-SJTU facility, the applicability of the fast reactor system analysis code FRTAC for LBE natural circulation transient simulation is preliminarily validated. And with the prediction of this FRTAC code, furtherly, effects of operating conditions as well as the corresponding fluid thermophysical properties, structural and geometric parameters of the loop, frictional and local resistances on the LBE natural circulation performances are quantitatively investigated.

Review of Thermal-Hydraulic Issues and Studies of Lead-based fast reactors

Transient Thermal-Hydraulic Evaluation of Lead-Bismuth Fast Reactor by Coupling Sub-Channel and System Analysis Codes

Study on the Hydraulic Performance of the Axial Flow Main Coolant Pump for Lead-Cooled Fast Reactor

Transient thermal hydraulic analysis of a small passive lead–bismuth eutectic cooled fast reactor

A Combined Analytical, Experimental and Simulation Investigation on LBE Natural Circulation Flow and Heat Transmission

Liquid metal cooled fast reactor thermal hydraulic research development: A review

Neutronic/Thermal-Hydraulic Design Features Of An Improved Lead-Bismuth Cooled Small Modular Fast Reactor

An Experimental Review of Steam Generator Tube Rupture Accident in Lead-Cooled Fast Reactors: Thermal-hydraulic Experiments Classification and Methods Introduction

Code Development and Preliminary Validation for Lead-Cooled Fast Reactor Thermal-Hydraulic Transient Behavior

Lead-Cooled Fast Reactor (LFR) Design: Safety, Neutronics, Thermal Hydraulics, Structural Mechanics, Fuel, Core, and Plant Design

Thermal-hydraulics Design and Safety Analysis of Small Modular Lead-Bismuth Cooled Fast Reactors

Thermal-hydraulic Research on Rod Bundle in the LBE Fast Reactor with Grid Spacer

Lead Cooled Fast Reactor Core Physics Parameters Calculation Based on Monte Carlo Method

Thermal-hydraulic Analysis of a Full-Scale Lead-Bismuth Cooled Fast Reactor Core Considering Inter-Wrapper Flow

Electromagnetic Field and Temperature Field Analysis of Coil Type Lead-Bismuth Electromagnetic Flowmeter

Design and hydraulic performance studies on an axial lead‐bismuth pump for GEN‐IV reactors

Numerical simulation on the thermal stratification in the lead pool of lead-cooled fast reactor (LFR)

Development and Application of a Refined Subchannel Analysis Code for Lead-Based Wire-Wrapped Bundles

Preliminary Safety Comparison of Lead-Cooled Fast Reactors with Advanced Fuels in Unprotected Transients

Code Development and Safety Analyses for Pb–Bi-cooled Direct Contact Boiling Water Fast Reactor (PBWFR)

Challenges and Solutions to the Application of Lead-Bismuth Eutectic Alloy Coolant