Abstract:This paper employs computational fluid dynamics to investigate the fuel assemblies within a sodium-cooled fast neutron reactor. To begin with, we developed computational models for seven wire spacer fuel rods under both normal operating conditions and transient blockage conditions. We conducted separate analyses to assess the impacts of normal operation, blockage thickness, and blockage area. This work allowed us to acquire data on the heat transfer properties and the flow field variations for the coolant, blockages, and fuel rods across different conditions. Subsequently, we leveraged these flow field alterations to examine the resulting temperature distributions. Analyses were conducted to evaluate the effects of normal operation, blockage thickness, and blockage area. The research acquired the heat transfer characteristics and flow field distribution variations of the coolant, blockages, and fuel rods under different operational conditions and utilized these variations to analyze the temperature distribution. Through research analysis, the following conclusions have been reached. Under normal operating conditions, the temperature and flow fields of the fuel components exhibit cyclic variations along the axial length, corresponding to the pitch of the wire spacers. Heat exchange between the internal and external subchannels occurs independently, which further substantiates that the incorporation of wire spacers strengthens lateral flow disturbances. This effect is more pronounced within the internal subchannels, thereby leading to a marked difference in the flow fields on either side of the wire spacers. In the case of blocked conditions, an increase in blockage thickness and area both lead to higher temperatures for the coolant, the blockages themselves, and the fuel rods. The temperature in the recirculation zone behind the blockages also rises with increasing blockage thickness and area, although the magnitude of this increase is not significant. After the onset of blockage conditions, the instantaneous temperature tends to increase. As time progresses, the instantaneous temperature fields following the blockage do not display greater fluctuations in temperature change than those observed after the system has stabilized. For the temperature parameters of the convective field, differences arising from an increase in blockage area are more significant than those caused by an increase in blockage thickness. When blockage area and blockage thickness are increased by the same multiple, an increase in blockage area results in a higher temperature peak. Increasing the area of blockage necessitates a longer duration for both the temperature and the velocity fields to revert to equilibrium.

Multi-scale coupling analysis of the flow blockage accident in the typical LFR

Development and Application of Multi-Physics Safety Analysis Code for Advanced Liquid Metal Cooled Reactor

Development of a subchannel code for blockage accidents of LMFRs based on the 3D fuel rod model

Fluid-structure Interaction Analysis of a Hypothetical Core Disruptive Accident in LMFBRs

Early Mitigation Measures for High Flux Reactor Loss-of-Coolant Accidents

Analysis of the experimental tests performed at NACIE-UP facility through a novel CFX-RELAP5 codes coupling

CFD Analysis of the Passive Decay Heat Removal System of an LBE-Cooled Fast Reactor

Coupled AC 2 -CFD simulations for a high-pressure core melt accident scenario

CFD analysis of thermal-hydraluic behaviors in a LBE cooled 19-pin wire wrapped bundle under porous lumped blockage conditions

Fractional scaling analysis of cladding temperature in large break loss of coolant accident

Transient thermal hydraulic analysis of a small passive lead–bismuth eutectic cooled fast reactor

Full-scale Neutronic/thermal–hydraulic Coupling Analysis of Plate-Type Reactor Based on RMC and MOOSE

Coolant Boiling Numerical Simulation of Subassembly for Liquid Metal Cooled Fast Breeder Reactor

A subchannel analysis code for advanced liquid metal fast reactor cores and study on heat transfer characteristics of core geometry parameters

Numerical Study on the Thermal Hydraulic Characteristics in a Wire-Wrapped Assembly of LFRs

Experimental study on the mechanism of flow blockage formation in fast reactor

Multi-physics code coupling methodology for the simulation of accidental transients in sodium cooled fast reactors

Design and Evaluation of Mitigation Measures for Tsinghua High Flux Reactor Loss-of-Coolant Accidents

Simulation Analysis Based on Sodium-Cooled Fast Reactor Fuel Assembly Under Blockage Accident

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach

A practical methodology devoted to pool‐type phenomena simulation in safety analysis for sodium‐cooled fast reactor