Abstract:<div class="abstract-group"> <section class="article-section article-section__abstract" lang="en" data-lang="en" id="section-1-en"> <h3 class="article-section__header main abstractlang_en main">Summary</h3> <div class="article-section__content en main"> <p>A core design of small modular liquid‐metal fast reactor (SMLFR) cooled by lead‐bismuth eutectic (LBE) was developed for power reactors. The main design constraint on this reactor is a size constraint: The core needs to be small enough so that (1) it can be transported in a spent nuclear fuel (SNF) cask to meet the electricity demands in remote areas and off‐grid locations or so that (2) it can be used as a power source on board of nuclear icebreaker ships. To satisfy this design requirement, the active core of the reactor is 1 m in height and 1.45 m in diameter. The reactor is fueled with natural and 13.86% low‐enriched uranium nitride (UN), as determined through an optimization study. The reactor was designed to achieve a thermal power of 37.5 MW with an assumption of 40% thermal efficiency by employing an advanced energy conversion system based on supercritical carbon dioxide (S‐CO<sub>2</sub>) as working fluid, in which the Brayton cycle can achieve higher conversion efficiencies and lower costs compared to the Rankine cycle. The outer region of the core with low‐enriched uranium (LEU) performs the function of core ignition. The center region plays the role of a breeding blanket to increase the core lifetime for long cycle operation. The core working fluid inlet and outlet temperatures are 300°C and 422°C, respectively. The primary coolant circulation is driven by an electromagnetic pump. Core performance characteristics were analyzed for isotopic inventory, criticality, radial and axial power profiles, shutdown margins (SDM), reactivity feedback coefficients, and integral reactivity parameters of the quasi‐static reactivity balance. It is confirmed through depletion calculations with the fast reactor analysis code system Argonne Reactor Computation (ARC) that the designed reactor can be operated for 30 years without refueling. Preliminary thermal‐hydraulic analysis at normal operation is also performed and confirms that the fuel and cladding temperatures are within normal operation range. The safety analysis performed with the ARC code system and the UNIST Monte Carlo code MCS shows that the conceptual core is favorable in terms of self‐controllability, which is the first step towards inherent safety. </p>

Lead-Cooled Fast Reactor Annular UN Fuel Design and Development of Performance Analysis Program

Thermo-mechanical Behavior Simulation Coupled with the Hydrostatic-Pressure-dependent Grain-Scale Fission Gas Swelling Calculation for a Monolithic UMo Fuel Plate under Heterogeneous Neutron Irradiation

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Comparative Study on Fuel Assembly of Modular Gas-cooled Fast Reactor using MCNP and OpenMC Code

Simulation of uranium mononitride spent fuel: A thermodynamic approach

Conceptual design and analysis of a new plate-type fuel element for flattening of reactor power distribution

Preliminary Multi-Physics Performance Analysis and Design Evaluation of UO2 Fuel for LBE-Cooled Subcritical Reactor of China Initiative Accelerator Driven System

Researches on Special Thermal Hydraulic Phenomena of Annular Fuel Assembly by Sub-Channel Analysis Code-NACAF

Multidimensional multiphysics simulations of the supercritical water-cooled fuel rod behaviors based on a new fuel performance code developed on the MOOSE platform

Numerical Simulation and Analysis on Thermal-hydraulic Behavior of Fuel Assembly for Sodium-cooled Fast Reactor

Investigation of swelling behaviors of U-10Zr metallic fuel in the low temperature regime via a cavitational void swelling model

Numerical Simulation of Compact Fuel Assembly in Fast Reactor

Effect of Fuel Meat Thickness on the Non-Uniform Irradiation-Induced Thermo-Mechanical Behavior in Monolithic UMo/Al Fuel Plates

Thermal-fluid-structure Coupling Analysis for Plate-Type Fuel Assembly under Irradiation. Part-I Numerical Methodology

Neutronics/thermal-hydraulics/fuel-performance coupling for light water reactors and its application to accident tolerant fuel

Steady-State Fuel Performance Analyses for the Preliminary Fuel Concept of General Atomics Fast Modular Reactor

Core design of long‐cycle small modular lead‐cooled fast reactor

Numerical analysis on the coolant-flow and heat-transfer in the fuel assembly

Structural seismic characteristics assessment of LMFR fuel assembly hexagonal wrapper over operational temperature range

Multi-Physics Field Coupling Optimization Study for U3si2-Al Arc-Type Fuel Plate Performance Analysis

Advanced Characterization-Informed Framework and Quantitative Insight to Irradiated Annular U-10Zr Metallic Fuels