Abstract:<div class="abstract-group"> <section class="article-section article-section__abstract" lang="en" data-lang="en" id="section-1-en"> <h3 class="article-section__header main abstractlang_en main">Summary</h3> <div class="article-section__content en main"> <p>A core design of small modular liquid‐metal fast reactor (SMLFR) cooled by lead‐bismuth eutectic (LBE) was developed for power reactors. The main design constraint on this reactor is a size constraint: The core needs to be small enough so that (1) it can be transported in a spent nuclear fuel (SNF) cask to meet the electricity demands in remote areas and off‐grid locations or so that (2) it can be used as a power source on board of nuclear icebreaker ships. To satisfy this design requirement, the active core of the reactor is 1 m in height and 1.45 m in diameter. The reactor is fueled with natural and 13.86% low‐enriched uranium nitride (UN), as determined through an optimization study. The reactor was designed to achieve a thermal power of 37.5 MW with an assumption of 40% thermal efficiency by employing an advanced energy conversion system based on supercritical carbon dioxide (S‐CO<sub>2</sub>) as working fluid, in which the Brayton cycle can achieve higher conversion efficiencies and lower costs compared to the Rankine cycle. The outer region of the core with low‐enriched uranium (LEU) performs the function of core ignition. The center region plays the role of a breeding blanket to increase the core lifetime for long cycle operation. The core working fluid inlet and outlet temperatures are 300°C and 422°C, respectively. The primary coolant circulation is driven by an electromagnetic pump. Core performance characteristics were analyzed for isotopic inventory, criticality, radial and axial power profiles, shutdown margins (SDM), reactivity feedback coefficients, and integral reactivity parameters of the quasi‐static reactivity balance. It is confirmed through depletion calculations with the fast reactor analysis code system Argonne Reactor Computation (ARC) that the designed reactor can be operated for 30 years without refueling. Preliminary thermal‐hydraulic analysis at normal operation is also performed and confirms that the fuel and cladding temperatures are within normal operation range. The safety analysis performed with the ARC code system and the UNIST Monte Carlo code MCS shows that the conceptual core is favorable in terms of self‐controllability, which is the first step towards inherent safety. </p>

Lead Cooled Fast Reactor Core Physics Parameters Calculation Based on Monte Carlo Method

Neutronic investigation of ALFRED lead-Cooled fast reactor core using monte carlo modeling

Lead-Cooled Fast Reactor (LFR) Design: Safety, Neutronics, Thermal Hydraulics, Structural Mechanics, Fuel, Core, and Plant Design

Transient thermal hydraulic analysis of a small passive lead–bismuth eutectic cooled fast reactor

Review of Thermal-Hydraulic Issues and Studies of Lead-based fast reactors

Core design of long‐cycle small modular lead‐cooled fast reactor

Core physics calculation study of miniature lead-bismuth cooled nuclear reactor

Study on the Hydraulic Performance of the Axial Flow Main Coolant Pump for Lead-Cooled Fast Reactor

Preliminary Core Design of the Long Life S-CO2 Cooled Fast Reactor With 300WMth

Research on CFD Calculation and Analysis Technology of Porous Media in Sodium Cooled Fast Reactor Core

Study of energy deposition in the coolant of LFR

Core design and reactivity control optimization of small lead-cooled reactor LFR-180

Full Core Criticality Modeling of Gas-Cooled Fast Reactor using the SCALE6.0 and MCNP5 Code Packages

Calculations of research reactor thermal hydraulics based on VVER-440 fuel assamblies

Neutronic analysis of european sodium-cooled fast reactor using Monte Carlo

Multi-scale coupling analysis of the flow blockage accident in the typical LFR

Lead-Cooled Fast Reactor Annular UN Fuel Design and Development of Performance Analysis Program

Modeling and Control Strategy of the China LBE Cooled Fast Reactor

Study on Reactor Core Physics Calculation of Marine Nuclear Power Platform

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Core Configuration Analysis for Modular Gas-cooled Fast Reactor (GFR) using OpenMC