Abstract:<div class="abstract-group"> <section class="article-section article-section__abstract" lang="en" data-lang="en" id="section-1-en"> <h3 class="article-section__header main abstractlang_en main">Summary</h3> <div class="article-section__content en main"> <p>A core design of small modular liquid‐metal fast reactor (SMLFR) cooled by lead‐bismuth eutectic (LBE) was developed for power reactors. The main design constraint on this reactor is a size constraint: The core needs to be small enough so that (1) it can be transported in a spent nuclear fuel (SNF) cask to meet the electricity demands in remote areas and off‐grid locations or so that (2) it can be used as a power source on board of nuclear icebreaker ships. To satisfy this design requirement, the active core of the reactor is 1 m in height and 1.45 m in diameter. The reactor is fueled with natural and 13.86% low‐enriched uranium nitride (UN), as determined through an optimization study. The reactor was designed to achieve a thermal power of 37.5 MW with an assumption of 40% thermal efficiency by employing an advanced energy conversion system based on supercritical carbon dioxide (S‐CO<sub>2</sub>) as working fluid, in which the Brayton cycle can achieve higher conversion efficiencies and lower costs compared to the Rankine cycle. The outer region of the core with low‐enriched uranium (LEU) performs the function of core ignition. The center region plays the role of a breeding blanket to increase the core lifetime for long cycle operation. The core working fluid inlet and outlet temperatures are 300°C and 422°C, respectively. The primary coolant circulation is driven by an electromagnetic pump. Core performance characteristics were analyzed for isotopic inventory, criticality, radial and axial power profiles, shutdown margins (SDM), reactivity feedback coefficients, and integral reactivity parameters of the quasi‐static reactivity balance. It is confirmed through depletion calculations with the fast reactor analysis code system Argonne Reactor Computation (ARC) that the designed reactor can be operated for 30 years without refueling. Preliminary thermal‐hydraulic analysis at normal operation is also performed and confirms that the fuel and cladding temperatures are within normal operation range. The safety analysis performed with the ARC code system and the UNIST Monte Carlo code MCS shows that the conceptual core is favorable in terms of self‐controllability, which is the first step towards inherent safety. </p>

Core physics calculation study of miniature lead-bismuth cooled nuclear reactor

Study on Reactor Core Physics Calculation of Marine Nuclear Power Platform

Core design of long‐cycle small modular lead‐cooled fast reactor

Improved design of LBE cooled solid reactor using 3D neutronics thermal-hydraulics coupling method

Study on physics characteristics of Th-U fuel in long-cycle core

Research on Fuel Physical Characteristics in Small Long-Life Nuclear Power System

Radial Basis Function Surrogate Model-Based Optimization of Small Light-Weight Lead-Bismuth Reactor Core

Lead Cooled Fast Reactor Core Physics Parameters Calculation Based on Monte Carlo Method

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

An Intelligent Optimization Method for Preliminary Design of Lead-Bismuth Reactor Core Based on Kriging Surrogate Model

Optimization of physical design for small long life Lead Cooled fast Reactor based on SARAX

The core design of a Small Modular Pressurised Water Reactor for commercial marine propulsion

Coupled Monte Carlo and Thermal-Hydraulics Modeling for the Three-Dimensional Steady-State Analysis of the Xi'an Pulsed Reactor

Conceptual Design and Feasibility Analysis of a Modular Supercritical CO2 Fast Reactor Core

Preliminary Core Design of the Long Life S-CO2 Cooled Fast Reactor With 300WMth

Non-uniform fuel distribution and thermo-mechanical analysis of a 1 MW thermal power micronuclear heat pipe reactor

Conceptual design of megawatt-level mobile nuclear power system based on heat pipe cooled reactor

Neutronics Analysis of A 100 kWe Pebble Bed Space Reactor Concept

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Full-scale Neutronic/thermal–hydraulic Coupling Analysis of Plate-Type Reactor Based on RMC and MOOSE

Neutron/Gamma Radial Shielding Design of Main Vessel in a Small Modular Molten Salt Reactor