Abstract:<div class="abstract-group"> <section class="article-section article-section__abstract" lang="en" data-lang="en" id="section-1-en"> <h3 class="article-section__header main abstractlang_en main">Summary</h3> <div class="article-section__content en main"> <p>A core design of small modular liquid‐metal fast reactor (SMLFR) cooled by lead‐bismuth eutectic (LBE) was developed for power reactors. The main design constraint on this reactor is a size constraint: The core needs to be small enough so that (1) it can be transported in a spent nuclear fuel (SNF) cask to meet the electricity demands in remote areas and off‐grid locations or so that (2) it can be used as a power source on board of nuclear icebreaker ships. To satisfy this design requirement, the active core of the reactor is 1 m in height and 1.45 m in diameter. The reactor is fueled with natural and 13.86% low‐enriched uranium nitride (UN), as determined through an optimization study. The reactor was designed to achieve a thermal power of 37.5 MW with an assumption of 40% thermal efficiency by employing an advanced energy conversion system based on supercritical carbon dioxide (S‐CO<sub>2</sub>) as working fluid, in which the Brayton cycle can achieve higher conversion efficiencies and lower costs compared to the Rankine cycle. The outer region of the core with low‐enriched uranium (LEU) performs the function of core ignition. The center region plays the role of a breeding blanket to increase the core lifetime for long cycle operation. The core working fluid inlet and outlet temperatures are 300°C and 422°C, respectively. The primary coolant circulation is driven by an electromagnetic pump. Core performance characteristics were analyzed for isotopic inventory, criticality, radial and axial power profiles, shutdown margins (SDM), reactivity feedback coefficients, and integral reactivity parameters of the quasi‐static reactivity balance. It is confirmed through depletion calculations with the fast reactor analysis code system Argonne Reactor Computation (ARC) that the designed reactor can be operated for 30 years without refueling. Preliminary thermal‐hydraulic analysis at normal operation is also performed and confirms that the fuel and cladding temperatures are within normal operation range. The safety analysis performed with the ARC code system and the UNIST Monte Carlo code MCS shows that the conceptual core is favorable in terms of self‐controllability, which is the first step towards inherent safety. </p>

Optimization of physical design for small long life Lead Cooled fast Reactor based on SARAX

An Intelligent Optimization Method for Preliminary Design of Lead-Bismuth Reactor Core Based on Kriging Surrogate Model

Radial Basis Function Surrogate Model-Based Optimization of Small Light-Weight Lead-Bismuth Reactor Core

Core design and reactivity control optimization of small lead-cooled reactor LFR-180

Core design optimization of a 200 MWt pressurized water SMR using evolutionary simulated annealing

Core design of long‐cycle small modular lead‐cooled fast reactor

Advanced Liquid-Metal-Cooled Fast Reactor Core Design Using Modern Optimization Algorithms

Preliminary Core Design of the Long Life S-CO2 Cooled Fast Reactor With 300WMth

Core physics calculation study of miniature lead-bismuth cooled nuclear reactor

Optimization of Spatial Structure Designs of Control Rod Using Monte Carlo Code RMC

Conceptual Design and Feasibility Analysis of a Modular Supercritical CO2 Fast Reactor Core

Core Optimization for Extending the Graphite Irradiation Lifespan in a Small Modular Thorium-Based Molten Salt Reactor

Core design selection for a long‐life modular gas‐cooled fast reactor using OpenMC code

Modular Modeling and Trust Region Based Real-Time Optimization for Load Changes in Modular High Temperature Gas-Cooled Reactor

Study on Reactor Core Physics Calculation of Marine Nuclear Power Platform

Multi-objective loading pattern optimization of a soluble boron free core using social spider algorithm

Preliminary analysis on in-core fuel management optimization of molten salt pebble-bed reactor

Physical Scheme Study of 10 MW Accelerator Driven Sub-critical Reactor

In-Core Fuel Management Design of Large Power PWR

Study on physics characteristics of Th-U fuel in long-cycle core

Thermal‐hydraulic analysis of an open‐grid megawatt gas‐cooled space nuclear reactor core