Abstract:An accelerator driven subcritical system (ADS) is a new nuclear energy system which could not only produce clean energy but also incinerate nuclear waste. In this paper, inherent safety analysis of an ADS is performed with neutronics and thermal-hydraulics coupled code named ARTAP. Five typical accidents are carried out, including the cases of proton beam interruption, transient overpower, reactivity insertion, loss of flow, and loss of heat sink. The transient simulations are performed in the average channel and the hottest channel of the fuel pin in the ADS core. The simulation results for beam interruption show that the highest temperature of the pellet is in the middle of the fuel element in the average channel, while the peak temperature of the cladding is in the top of the fuel element. After the beam is interrupted for 20s, the maximum temperature drops at the fuel center, the cladding inner surface, and the outlet coolant in the hottest channel are 644.46K, 162.27K, and 136.42K respectively. For transient overpower accidents with the increase of beam intensity, the maximum temperature of the fuel and the cladding are below the safety limit. Concerning the reactivity insertion accident, it is found that the ADS has good inherent safety and its margin of criticality safety is large. The calculation results for loss of flow show that the power drop is small due to low sensitivity of the subcritical core to negative reactivity feedback, and the maximum temperature of the cladding reaches 1726K, which means the fuel element would rupture. However, the power and the temperatures of fuel, cladding, and coolant could decrease quickly to the safety level after the proton accelerator is cut off under a loss of flow accident. The results also show that the peak temperature of the cladding is lower than the safety limit under a loss of heat sink accident. The present simulation results reveal that the ADS has a remarkable advantage against severe accidents. It also implies that its inherent safety characteristics could ensure reactor shutdown by cutting off the proton beam after accidents occur.

Physical Scheme Study of 10 MW Accelerator Driven Sub-critical Reactor

Burnup study on the effective transmutation of minor actinides based on multi-enrichment fuel in the ADS subcritical reactor

Enhanced transmutation of minor actinides by incorporation of multi-beam design in Accelerator-Driven subcritical system

Swing Reactivity Calculation of Accelerator Driven System Subcritical Reactor 100 MWth

Inherent Safety Characteristics of Lead Bismuth Eutectic-Cooled Accelerator Driven Subcritical Systems

Thermal-Hydraulic Model and Program Development for Helium-Cooled Accelerator-Driven System

Study Analysis of Multiplication Factor on ADS Transmutation System

Physics Design of an Accelerator for an Accelerator-Driven Subcritical System

Study of External Source Effects for Different Multibeam Concept for Accelerator-Driven Subcritical Reactor for Nuclear Waste Transmutation (ADS-NWT)

Sustainable Development of Nuclear Energy and Study on ADS in China

MA Transmutation Performance Simulation and Accompanied Burning-up Analysis for C-ADS

Thermal-Hydraulic Analysis Of Concept Design Of Spallation Target In Chinese Accelerator Driven Subcritical System

Comparative Safety Analysis of Accelerator Driven Subcritical Systems and Critical Nuclear Energy Systems

The Research on the Characteristics of Target and Core in a Gas-Cooled ADS with Passive Safety

Preliminary neutronics optimization on the concept of multi-beam accelerator driven system

ACCELERATOR DRIVEN SUBCRITICAL REACTORS.

Neutronics and Thermal-Hydraulics Coupling Analysis in Accelerator-Driven Subcritical System

Preliminary Study on Transmutation of Plutonium and Minor Actinides in Accelerator Driven System

COUPLED FAST / THERMAL SPECTRUM SUBCRITICAL BLANKET FOR ADS

Beam optics design of the superconducting region of the JAEA ADS

Flux Flattening Large Heavy Water Power Reactors with Accelerator-Driven Photoneutron Source