Abstract:Accelerator-driven subcritical system (ADS) is a new generation nuclear reactor with various highly coupled physical fields. A typical system is a liquid metal, lead-bismuth eutectic cooled subcritical reactor core coupled to a neutron spallation target. Therefore, ADS simulations require multi-physics coupling among the proton, neutronics, and thermal hydraulics. In this work, GEANT4, RMC, and FLUENT were used to simulate the multiphysics processes in MYRRHA. The GEANT4/RMC was used for the spallation process and the proton-neutron transport calculations, with the power distributions verified against the MCNP6 code with an average difference of about 1.85%. A hybrid RMC/FLUENT coupling scheme was used for the neutronics thermal-hydraulics calculations. The subcritical reactor was simplified using the porous media method for the FLUENT simulations to obtain the coolant temperature and density fields. A temperature-dependent thermal conductivity model used to calculate the temperature filed in typical fuel pellets gave consistent results with the FLUENT predictions within an absolute error of 3 K. The neutronics and thermal-hydraulics coupling took the temperature and the lead-bismuth eutectic density feedback into consideration. Simulations show that thermal-hydraulics feedback has a fairly small effect on the power distribution in the ADS reactor. In this case, the radial power difference between the coupling and coupling-free is within 5%. In addition, the mechanisms of neutronics/thermalhydraulics are compared for lead-bismuth eutectic cooled reactors and water-cooled reactors. The feedback is much more significant in water-cooled reactors than in the Pb-Bi cooled reactor since the water moderation, and the water density is more sensitive to the temperature.

Preliminary neutronics optimization on the concept of multi-beam accelerator driven system

Study of External Source Effects for Different Multibeam Concept for Accelerator-Driven Subcritical Reactor for Nuclear Waste Transmutation (ADS-NWT)

The influence of source locations of different multi-beam concept on the power density distribution and nuclear waste transmutation performance for ADS–NWT

Neutronics and Thermal-Hydraulics Coupling Analysis in Accelerator-Driven Subcritical System

Investigation of target in C-ADS and IAEA ADS benchmark

Thermal-Hydraulic Analysis Of Concept Design Of Spallation Target In Chinese Accelerator Driven Subcritical System

Physical Scheme Study of 10 MW Accelerator Driven Sub-critical Reactor

Transverse Profile Expansion and Homogenization at Target for the Injector Scheme-I Test Stand of China-ADS

Thermal-hydraulic analysis of LBE spallation target for accelerator-driven systems

Research On Nuclear Heat Deposition Behavior In The Spallation Target Of An Accelerator Driven Subcritical System

Study on collimation and shielding of the back-streaming neutrons at the CSNS target

Design and beam dynamics simulation of an 8 MeV compact accelerator-driven neutron source

Beam Optics Analysis for the 120-keV Multiaperture Accelerator of Neutral Beam Injector

Monitoring method for neutron flux for a spallation target in an accelerator driven sub-critical system

Physics Design of an Accelerator for an Accelerator-Driven Subcritical System

Cascaded Target Normal Sheath Acceleration

Beam Dynamic Design and Study of a Linac with Variable Output Energy for an AB-BNCT Facility

Thermal-Hydraulic Analysis of Spallation Target in Accelerator Driven Sub-critical System

Start-to-end Modeling and Transmission Efficiency Optimization for a Cyclotron-Based Proton Therapy Beamline

Study On Power Control Methodology Of The Accelerator Driven Sub-Critical Reactor System

Compact pulsed hadron source - a university-based accelerator platform for multidisciplinary neutron and proton applications*