Abstract:Recently, a major focus in the nuclear field lies on developing small and medium sized reactors (SMRs). Their purpose is not only restricted to electricity generation but also non-electric applications such as propulsion or desalination. In particular, nuclear propulsion has received considerable attention to date. One of the main reason is that high power source has become important for ships. For examples, in cases of icebreaker or commercial large cargo ship, around 100 MWth ~ 200 MWth of output is required, which is a typical value of that of SMRs. In addition, International Maritime Organization (IMO) requests the reduction of the greenhouse gas emission recently. In line with those trends, the nuclear marine propulsion has gained interest. In order for the nuclear marine propulsion to be widely applied, safety of the system must be assured. Especially, the ocean condition restricts the outside intervention for mitigating accident cases, which implies that passive safety is essential. Among many passive safety systems, a passive residual heat removal system (PRHRS) is of interest in this study. In the land-based PRHRS, one of the most practical and fully-passive configuration is the system where the initial large decay heat is removed by outside pre-installed water tank, and after all the water evaporates air-cooling tower cools down the heat. This system can effectively remove the decay heat for a longterm without relying on any intervention, but it usually requires a large volume of the air-cooling tower. In the ocean-based PRHRS, the available space for the reactor system is very limited, meaning that the conventional large one is not suitable for this case. Therefore, a new concept of PRHRS, which combines the air-cooled tower and the seawater-cooling is suggested. The basic idea is as follows. Some amount of decay heat is removed by the air-cooled tower, which is installed at the upper part, inducing the natural circulation flow. Then the seawater-cooling part effectively removes the rest of decay heat as temperature of the seawater is very low, although the flow rate is small. That is, the required size of the air-cooled tower is expected to be decreased because the seawater can reduce the heat removal load of the tower. However, the system characteristic will be different from that of conventional one, since two heat sinks are installed in a single loop. Therefore, the purpose of this study is preliminary designing the system and evaluating the overall size of it. The results can provide a first insight into the new concept of system. This paper describes the characteristic of buoyancy head of the system, air-cooled condenser design, and feasibility of the system.

The core design of a Small Modular Pressurised Water Reactor for commercial marine propulsion

Reactor Core Design and Analysis for a Micronuclear Power Source

Study on the seawater cooled PRHRS of a nuclear propulsion ship with the upper heat exchanger for driving force and the seawater heat exchanger as an ultimate heat sink

On the Use of Selected 4th Generation Nuclear Reactors in Marine Power Plants

Nuclear design of an integrated small modular reactor based on the APR-1400 for RO desalination purposes

Reactor design of UPR-1: A MW-level reactor for unmanned underwater vehicle propulsion using low-enriched uranium

The Design Features of Integrated Modular Water Reactor (IMR)

Reactivity Control Optimization of Boron-Free Small Modular Pressurized Water Reactor with Helical-Cruciform Metallic Fuel

Core physics calculation study of miniature lead-bismuth cooled nuclear reactor

Core design of long‐cycle small modular lead‐cooled fast reactor

Soluble Boron Free Small Modular Pressurized Water Reactor Core Design by Using NECP-Bamboo

Conceptual design and thermal-hydraulic analysis of a megawatt-level lead-bismuth cooling reactor for deep-sea exploration

Conceptual Design and Feasibility Analysis of a Modular Supercritical CO2 Fast Reactor Core

Design considerations of the supercritical carbon dioxide Brayton cycle of small modular molten salt reactor for ship propulsion

Progress, Case Studies, and Safety

Preliminary Analysis of Passive Residual Heat Removal System for a Nuclear-powered Ship

Steady-State Thermal-Hydraulic Analysis of a Particle-Bedded Boiling Water Reactor

Boron-Free Small Modular Pressurized Water Reactor Design with New Burnable Absorber

Core neutronic design of small modular molten salt reactor for submarine propulsion

Economic and environmental impact assessments of a newly designed energy system for marine applications

Comparisons of Reduced Moderation Small Modular Reactors with Heavy Water Coolant