Abstract:_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper OTC 31800, “Energy Transition Options for Offshore Vessels,” by Jeroen Hollebrands, Benny Mestemaker, and Jan Westhoeve, Royal IHC, et al. The paper has not been peer reviewed. _ A future offshore fleet must comply with emissions regulations and policies that will become increasingly stringent. Making the right decisions with regard to emissions-reduction technologies and preparing vessels for future fuel options to keep the vessels compliant over time is, therefore, of great importance. The cable-lay vessels (CLV) used as a basis for the analysis presented in the complete paper are designed to meet such requirements. The authors highlight types of fuels and drive systems and the consequences of different combinations thereof on vessel design and operational profile. Alternative Fuels To Reduce Emissions Several alternative fuels are under consideration to replace fossil fuels currently used in the maritime sector. These include the following: - Liquefied natural gas (LNG) - Methanol - Ammonia - Hydrogen (compressed, liquefied, or in a storage medium) Design Approach for Zero-Emission Vessels The drive system of any zero-emission vessel requires four changes to integrate alternative fuels and prime movers effectively from a system-integration perspective: operational-profile design, electrification, hybridization, and modularization. - The operational profile defines the activities and operational demands of a specific vessel. - Electrification is necessary for the application of novel prime movers such as fuel-cell systems. Most CLVs already are equipped with a diesel electric configuration. - Redundancy of the prime movers leads to more engines online than are necessary. This is where hybridization comes into play because an energy-storage system can be used as a spinning reserve. - Modularization of drive systems provides flexibility to optimize the drive system for each task the work vessel must perform. Prime-Mover Technology for Zero-Emission Vessels The prime movers considered for future maritime application can be divided into internal combustion engines and fuel cells. Fuel cells generally are more efficient than engines and produce fewer emissions because the fuel is oxidized in an electrochemical process and not combusted at higher temperatures. However, fuel cells come at the cost of a slower transient response and have a lower tolerance for fuel impurities. In the complete paper, the following three fuel cell types are stipulated for use in maritime applications: - The low-temperature polymer electrolyte membrane fuel cell (LT-PEMFC) operates at 65–80°C with a high power density and good load-following capabilities but requires high-purity hydrogen because of its sensitivity to carbon monoxide. - The high-temperature polymer electrolyte membrane fuel cell (HT-PEMFC) operates at 140–160°C with a better tolerance for fuel purity but with a lower efficiency and a slower startup time and transient response than the LT-PEMFC. - The solid oxide fuel cell (SOFC) operates at relatively high temperatures of 500–1000°C, a trait that enables integration with internal fuel processing and waste-heat recovery. Despite their fuel flexibility and electrical efficiencies up to 65%, SOFC products are still relatively expensive, large, and heavy. In addition, cold starts are slow and load-following is sluggish to prevent thermal overloading and fuel starvation.

Merchant Shipping's Nuclear Option: Nuclear-powered cargo ships failed decades ago, but small modular reactors could make all the difference

Existing Regulatory Shortcomings and Improvements

A Comparison of Alternative Fuels for Shipping in Terms of Lifecycle Energy and Cost

The core design of a Small Modular Pressurised Water Reactor for commercial marine propulsion

Decarbonization of Marine Fuels—The Future of Shipping

A Study on the Viability of Fuel Cells as an Alternative to Diesel Fuel Generators on Ships

On the Use of Selected 4th Generation Nuclear Reactors in Marine Power Plants

Route to zero emission shipping: Hydrogen, ammonia or methanol?

A Preliminary Study on an Alternative Ship Propulsion System Fueled by Ammonia: Environmental and Economic Assessments

Decarbonising ships, planes and trucks: An analysis of suitable low-carbon fuels for the maritime, aviation and haulage sectors

Decarbonization in Shipping—The Hopes and Doubts on the Way to Hydrogen Use

An integrated perspective on the decarbonization of shipping

Decarbonization pathways for bulk vessels: Integrating power systems, fuels, and control measures

Challenges and Solutions of Ship Power System Electrification

Hybrid Power and Propulsion Systems for Ships: Current Status and Future Challenges

Life-Cycle Assessment and Costing of Fuels and Propulsion Systems in Future Fossil-Free Shipping

Ship Energy Efficiency and Maritime Sector Initiatives to Reduce Carbon Emissions

Alternative fuel options for low carbon maritime transportation: Pathways to 2050

Reviewing two decades of cleaner alternative marine fuels: Towards IMO's decarbonization of the maritime transport sector

Energy-Transition Options for Offshore Vessels

Analysis of the Best Fuel Mix for Shipping during the Zero Carbon Transition