Abstract:Abstract As one of the proposed six types of Gen-IV nuclear energy systems, lead-cooled fast reactor (LFR) has some advantages in safety, economy, sustainability, and proliferation prevention. With its low melting point, chemical inertia, high boiling point temperature, pretty good neutronics and γ shielding ability, lead bismuth eutectic (LEB) has been one of the common choices of lead-base coolant for fast reactors. A certain natural circulation capacity might be achieved in LBE flow systems due to its relatively high thermal expansion and thus induced buoyancy. Consequently, for the purpose of enhancing natural safety performance and operation economy, as well as for other specific needs, natural circulation is, in recent years, considered for the main heat transmission system or residual heat removal systems in some LBE fast reactor designs. Study of LBE natural circulation along with its heat transmission performance is thus of quite significance for LBE natural circulation fast reactor design and natural safety performance improvement. In this paper, steady-state flow and heat transmission characteristics and behaviors of LBE natural circulation, as well as those of other coolant media (sodium and water), are theoretically and comparatively studied. Meanwhile, based on both the steady and transient natural circulation experiments on the LBE natural circulation test facility, namely, LNC-SJTU facility, the applicability of the fast reactor system analysis code FRTAC for LBE natural circulation transient simulation is preliminarily validated. And with the prediction of this FRTAC code, furtherly, effects of operating conditions as well as the corresponding fluid thermophysical properties, structural and geometric parameters of the loop, frictional and local resistances on the LBE natural circulation performances are quantitatively investigated.

Design and hydraulic performance studies on an axial lead‐bismuth pump for GEN‐IV reactors

The theoretical and numerical analysis on a multi-blade liquid lead pump

Lubrication Performance Analysis of Lead-Bismuth Internal-Feedback Bearings in the Nuclear Main Pump System

Study on the Hydraulic Performance of the Axial Flow Main Coolant Pump for Lead-Cooled Fast Reactor

Experimental and Numerical Studies on the Hydraulic Performance and the Internal Flow Characteristics of Lead-Bismuth in the Main Coolant Pump of LFR

Study on Flow Characteristics in LBE-cooled Main Coolant Pump under Positive Rotating Condition

Research on Enhancement of Natural Circulation Capability in Lead-Bismuth Alloy Cooled Reactor by Using Gas-Lift Pump

A Combined Analytical, Experimental and Simulation Investigation on LBE Natural Circulation Flow and Heat Transmission

Thermal-hydraulic Research on Rod Bundle in the LBE Fast Reactor with Grid Spacer

Research and Optimization of ALIP Performance Based on Improved Equivalent Circuit

Large Eddy Simulation on the Lead-Bismuth Eutectic Jet at Reactor Core Outlet

Natural circulation with LBE as a working substance to be published in: Progress in nuclear energy

Coupling of Neutronics and Thermal-Hydraulics Codes for the Simulation of Reactivity Insertion Accident for LFR

Study on the Four-Quadrant Homologous Characteristic and Two-Phase Flow Head Degradation of a Reactor Coolant Pump

Transient thermal hydraulic analysis of a small passive lead–bismuth eutectic cooled fast reactor

Numerical Investigation on the Performance of Gas-Lift Pump with Large Density Ratio of Liquid to Gas

Optimization design of super low-specific-speed centrifugal pump for LRE

Computational Fluid Dynamics-Based Pump Redesign to Improve Efficiency and Decrease Unsteady Radial Forces

Experimental Investigation of Gas Lift Pump in a Lead-Bismuth Eutectic Loop

EXPERIMENTAL RESEARCH ON HEAT TRANSFER CHARACTERISTIC OF LIQUID LEAD-BISMUTH EUTECTIC FLOWING IN ANNULAR CHANNEL