Abstract:Tsinghua University's low-temperature nuclear heating reactor (NHR) primarily focused on heating supply in its initial design. However, utilizing the reactor solely as a heat source limits its economic efficiency and competitiveness. To further broaden the application scope of the NHR200-II reactor, several modifications were implemented based on the original design. These include replacing the vertical steam generator with a horizontal one, which facilitates easier discharge of fouling, and add a superheater to enhance the thermal parameters values of the secondary loop to generate the desired superheated steam for industrial users. A comprehensive numerical modeling approach was employed to establish the primary loop, intermediate loop, secondary loop, and the passive residual heat removal system (PRHR) models for the NHR200-II reactor. The computational results indicate that the novel superheated steam supply system of the NHR200-II reactor exhibits good power control capability within the range of 50%-100% of the full power, with a step size of 10%. Moreover, the reactor demonstrates the ability to operate between 50% and 100% of the full power for a 24-h period, meeting the superheated steam demand of an industrial plant in a Chinese demonstration project. Furthermore, in the event of a reactor shutdown, the passive residual heat removal system efficiently removes the residual heat from the reactor core, thus preventing core meltdown accidents. The power between the reactor core and the superheated steam supply system could be well matched, and there could also be effective power distribution and coordination among the three heat exchangers. These numerical simulation results not only verify the new design of NHR200-II, but also contribute to the advancement of a demonstration project for a low-temperature nuclear heating reactor.

Review of Thermalhydraulic Experimental Researches at Inet

Thermalhydraulic Investigation Using a Test Facility Simulating 200 MW Integral Heating Reactor

Numerical Simulation of the Transient Flow Characteristics and Thermal Stratification Phenomena in the Passive Residual Heat Removal System of NHR-200-II

Thermo-hydraulic Experimental Validation of an Integrated Modular Small Reactor Operating in Full Power Natural Circulation

Results And Discussion On Scaling Analysis For The Nhr200-Ii Integral Test Facility Under Single Phase Natural Circulation

Some Features Of The Nuclear Heating Reactor (Nhr) Design In China

Several Mechanical Problems In High Temperature Gas-Cooled Reactor

Research on Power Regulation and Distribution of the Improved NHR200-II Low Temperature Nuclear Heating Reactor

Review of Thermal-Hydraulic Issues and Studies of Lead-based fast reactors

THERMAL HYDRAULICS ANALYSIS OF ADVANCED NUCLEAR HEATING REACTOR

Investigation on thermohydraulic characteristics of novel superheated steam supply system for low temperature nuclear heating reactor

Steady-state Thermal Fluids Analysis for the HTR-PM Equilibrium Core

Experimental and Theoretical Study on Density Wave Instability in Low Quality Natural Circulation Loop

Present status of research and development for HTR in China

Reactor physics analysis of nhr200-ii heating reactor using rmc monte carlo code

Scaling Analysis and Design for Integrated Nuclear Heating Reactor Ⅱ Major Loop Test Facility under Single Phase Natural Circulation

Research Method and Two-Phase Flow Stability of the Steam Generator of HTR-10

Investigation on Two-Phase Flow Stability in a Natural Circulation System / Untersuchung Der Stabilität Einer Zweiphasenströmung in Einem System Mit Naturumlauf

Status and Research of Highly Efficient Hydrogen Production Through High Temperature Steam Electrolysis at Inet

Liquid metal cooled fast reactor thermal hydraulic research development: A review

Research on Wastewater Source Term in High-Temperature Gas-Cooled Reactor and the Environmental Impact at Inland Sites