Pulsed Superconductivity Acceleration

M. Liepe

DOI: https://doi.org/10.48550/arXiv.physics/0009098

2000-09-30

Abstract:The design of the proposed linear collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities, operated in pulsed mode. Within the framework of an international collaboration the TESLA Test Facility (TTF) has been set up at DESY, providing the infrastructure for cavity R&D towards higher gradients. More than 60 nine-cell cavities were tested, accelerating gradients as high as 30 MV/m were measured. In the second production of TTF-cavities the average gradient was measured to be 24.7 MV/m. Two modules, each containing eight resonators, are presently used in the TTF-linac. These cavities are operated in pulsed mode: 0.8 ms constant gradient with up to 10 Hz repetitions rate. We will focus on two aspects: Firstly, the cavity fabrication and treatment is discussed, allowing to reach high gradients. Latest results of single cell cavities will be shown, going beyond 40 MV/m. Secondly, the pulsed mode operation of superconducting cavities is reviewed. This includes Lorentz force detuning, mechanical vibrations (microphonics) and rf field control. Both topics meet the upcoming interest in superconducting proton linacs, like the sc driver linac for SNS (Spallation Neutron Source).

Accelerator Physics

What problem does this paper attempt to address?

The problems that this paper attempts to solve mainly focus on the development and verification of high - performance superconducting cavity technologies for high - energy physics experiments (especially the linear collider TESLA). Specifically, the paper focuses on the following aspects:

1. **Increasing the accelerating gradient of superconducting cavities**:
- The paper explores how to achieve a higher accelerating gradient through improved manufacturing processes, treatment techniques, and operation modes. For example, it is mentioned in the paper that through the electropolishing (EP) technique, the accelerating gradient of a single - cell cavity can exceed 40 MV/m.

2. **Verifying the reliability and performance in pulsed mode**:
- Researchers have carried out a large number of tests in the TESLA Test Facility (TTF) to ensure that the superconducting cavities can operate stably and reach the required performance indicators in pulsed mode. Pulsed - mode operation is of great significance for future hadron colliders (such as the superconducting - driven linear accelerator of SNS).

3. **Solving the key problems affecting the performance of superconducting cavities**:
- The paper discusses the main factors limiting the performance of superconducting cavities, including thermal instabilities (quenches), field - emission currents, and the decline of the quality factor, and proposes methods and technical improvement measures to solve these problems.

4. **Optimizing the design and manufacturing processes of superconducting cavities**:
- In order to reduce costs and further improve performance, researchers have explored seamless cavity manufacturing techniques (such as hydroforming) and demonstrated the potential of these techniques in increasing the accelerating gradient.

In summary, this paper aims to show the progress made by the TESLA cooperation project in the development of high - performance superconducting cavities and provide technical support and solutions for future higher - energy linear colliders (such as TESLA upgraded to a center - of - mass energy of 800 GeV).