Abstract:The Beam Dump Facility (BDF) is a planned fixed-target installation in CERN's North Area, set to start operating in 2031. A proton beam of 400 GeV/c will be delivered in 1 s pulses of 4e13 protons every 7.2 s, amounting to 4e19 protons on target (PoT) per year, with an average thermal power deposition of 305 kW. The experiment requires high-Z and high-density materials and involves challenging thermomechanical conditions; hence, a water-cooled refractory metal core is proposed. To prevent corrosion and erosion, the target materials - tungsten and a molybdenum-based alloy, TZM-, are clad with a tantalum alloy using hot isostatic pressing. To verify the reliability of the target design and manufacturing process, a reduced-scale prototype target was manufactured and irradiated with 2.4e16 PoT in 2018. This paper presents the findings of the post-irradiation examination (PIE) conducted 2.5 years later. The PIE consisted of non-destructive and destructive activities, including film imaging, microscopy, metrology, ultrasonic testing, microstructural analysis, and mechanical and thermal characterization. No irradiation effects resulting from thermal stresses, such as geometrical changes or cracks in the cladding, were observed, and it was determined that the bonding between the core and cladding materials was robust. Moreover, no changes were detected in the microstructures or mechanical properties of the bulk materials. In conclusion, the robustness of the target baseline design and manufacturing process was confirmed, validating its suitability for operating under the desired conditions. Nonetheless, the observed brittleness of sintered tungsten indicates a potential area for improvement to enhance the lifetime of the BDF target. Overall, the examinations provided valuable insights into the performance of the prototype and indicated potential refinements for the future BDF target complex.

Cold- and Beam Test of the First Prototypes of the Superstructure for the TESLA Collider

Superconducting Superstructure for the TESLA Collider: New Results

Pulsed Superconductivity Acceleration

Superstructures For High Current Fel Application

Achievement of 35 MV/m in the Superconducting Nine-Cell Cavities for TESLA

Test Results of Tesla-Style Cryomodules at Fermilab

Active HOMs excitation in the first prototypes of superstructure

First considerations on the supporting structures of FCC-ee booster and collider in the arc regions

Performance of the 2 × 4-Cell Superconducting Linac Module for the THz-FEL Facility

Building the Runway: A New Superconducting Magnet Test Facility Made for the SPARC Toroidal Field Model Coil

Operational Experience from LCLS-II Cryomodule Testing

Beam-based commissioning of a novel -band transverse deflection structure with variable polarization

Hollow Electron Beam Collimator: R&D Status Report

The Conversion of CESR to Operate as the Test Accelerator, CesrTA, Part 4: Superconducting Wiggler Diagnostics

Thermal Research of a Single Crystal Tungsten Target Positron Source for the STCF Project in China

Post-irradiation examination of a prototype tantalum-clad target for the Beam Dump Facility at CERN

Longitudinal Beam Dynamics and Collective Effects at the STCF Collider Rings

Design of a 3 GHz Accelerator Structure for the CLIC Test Facility (CTF 3) Drive Beam

The TESLA Detector

High Field Experiment of 1.3 M-Long X-band Structure

Strong Interaction Physics at the Luminosity Frontier with 22 GeV Electrons at Jefferson Lab