Abstract:Erosion of materials is one of the major causes that lead to the malfunction of equipment and facilities, and surface texturing can be a solution for enhancement of erosion resistance. In this work, superwetting (superhydrophilic/superhydrophobic) titanium (Ti) alloy surface with periodic microstructure was prepared by a facile laser-based surface texturing approach which combines laser surface texturing and low-temperature annealing. The effect of laser-induced surface texture and wettability on the erosion resistance of the laser textured surface was studied. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the chemical surface microstructure and surface on the untreated and laser textured surfaces. The hardness and contact angle of the untreated surface, superhydrophilic surface and superhydrophobic surface were measured by microhardness tester and contact angle goniometer. Using an in-house built erosion experimental setup, the erosion resistance of the untreated surface, superhydrophilic surface and superhydrophobic surface was investigated. The experimental results demonstrate that micro-bumps are formed after laser surface texturing. In the meantime, the surface hardness for the laser textured surface with a step size of 150 μm is increased by 48% under the load of 1.961 N. Compared with the untreated surface, the erosion resistance is increased by 33.9%, 23.8% and 16.1%, respectively, for the superhydrophobic surface. The SEM results show that the untreated surface has large and deep impact pits, while the superhydrophobic surface only has small and shallow impact pits, indicating that the erosion process resulted in less damage to the substrate. The EDS results shows that superhydrophobicity plays a critical role in protecting the substrate from erosion. It is thus believed that the superhydrophobic surface has pronounced effects for improving the hardness and erosion resistance of Ti alloy.

Effect of Acid Erosion on the Tribological Performance of 304 Stainless Steel Surface Subjected to Liquid-Assisted Laser Texturing

Hydrophobic surface texture air-liquid phase composite assisted laser processing and tribological properties

Enhancing the wettability for 4043 aluminum alloy on 301L stainless steel via chemical-etched surface texturing

Effect of Nanosecond Laser Texturization on Tribological Behavior of AISI 321 Stainless Steel

Laser Texturing for Superwetting Titanium Alloy and Investigation of Its Erosion Resistance

Improved tribological performance of AISI 316L stainless steel by a combined surface treatment: Surface texturing by selective laser melting and plasma nitriding

Friction and Wear Behavior of 316L Stainless Steel with Laser Micro-Hole Texture and Micro-Square-Column Array Texture

Laser Surface Texturing of Stainless Steel − Effect of Pulse Duration on Texture's Morphology and Frictional Response

Effect of Ultrasonic Cleaning after Laser Texturizing of Surface of AISI 316L Steel on the Degree of Wetting and Corrosion Resistance

Assessment of Mechanical and Slurry Erosive Behavior on Laser-Textured Stainless Steel (SS410)

Realizing the tribological feasibility of novel laser surface texturing techniques for cold spray kinetically metallized stainless steel

Effect of Laser Shock Peening on Electrochemistry and Wettability of Additively Manufactured Stainless Steel

Effect of frictional frequency on the subsurface evolution of 316L stainless steel in tribocorrosion and its influence on the synergistic effect between corrosion and wear

Effect of Lubricant Infiltration into the Groove-Like Surface Texture on the Friction Response of the Textured Stainless-Steel Contact Surface

EFFECT OF MICRO-TEXTURES AND CrAlSiN COATINGS ON THE FRICTION AND WEAR PROPERTIES OF 316L STAINLESS STEELS IN SEAWATER

Effects of surface deformation on corrosive wear of stainless steel in sulfuric acid solution

Effect of multiple laser peening on the wear resistance of 304 stainless steel

Influence Of Cathodic Arc Plasma Titanizing On Tribological Properties Of 316l Stainless Steel

Nanosecond Laser Fabrication Of Superhydrophobic Surface On 316l Stainless Steel And Corrosion Protection Application

Friction and Wear Behavior Analysis of the Stainless Steel Surface Fabricated by Laser Texturing Underwater

Erosion development in AISI 316L stainless steel under pulsating water jet treatment