Abstract:<div class="abstract-group"> <section class="article-section article-section__abstract" lang="en" data-lang="en" id="section-1-en"> <h3 class="article-section__header main abstractlang_en main">Abstract</h3> <div class="article-section__content en main"> <div class="article-section__content" id="adem201801016-sec-0001"> <p>Laser surface texturing is a powerful tool to fabricate functional surface textures, whereby their morphology and cross‐sectional profile greatly depend on laser parameters such as pulse duration and fluence. In this work, the authors fabricate well‐defined groove‐like textures on stainless steel by laser surface texturing using different pulse durations ranging from nano‐ to femtoseconds, while keeping structural parameters such as depth and periodicity fairly constant. By doing so, the influence of the pulse duration on the resulting cross‐sectional profile of the textures and its subsequent impact on the tribological response are assessed. Reciprocating ball‐on‐disk tests and computational fluid dynamic simulations with Abaqus are used to evaluate the tribological performance of the as‐fabricated textures. Their results demonstrate that the use of laser pulses with different pulse durations induce changes in the resulting cross‐sectional profiles with the formation of rims/bulges well as the occurrence of recast phenomena and debris accumulation for nanosecond laser pulses. Decreasing the pulse duration significantly reduces the heat affected zone and the thermal damage, as well as avoided the formation of rims/bulges. Reciprocating ball‐on‐disk tests demonstrated that the differences in the cross‐sectional profiles have a significant influence on friction and wear behavior of the textured surfaces.</p>

The Study of Micro-grating and Micro-square-column on Frictional Resistance Reduction of 316L Stainless Steel Surface

Friction and Wear Behavior of 316L Stainless Steel with Laser Micro-Hole Texture and Micro-Square-Column Array Texture

Friction and wear characteristics modification via laser surface textured grooves

Effect of Nanosecond Laser Texturization on Tribological Behavior of AISI 321 Stainless Steel

Study on the wear performance of 304 stainless steel aerospace joint bearings

Effect of Micro-Textured Surfaces and Sliding Speed on the Lubrication Mechanism and Friction-Wear Characteristics of CF/PEEK Rubbing against 316L Stainless Steel under Seawater Lubrication

Friction and Wear Mechanisms of 316L Stainless Steel in Dry Sliding Contact: Effect of Abrasive Particle Size

Frictional Characteristic Curves of Ground Surfaces in Lubricated Sliding

Laser Surface Texturing of Stainless Steel − Effect of Pulse Duration on Texture's Morphology and Frictional Response

Application of Taguchi Method Design to Investigate Tribological Performance of Laser-Surface-Textured 316L Austenitic Stainless Steel

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Improved tribological performance of AISI 316L stainless steel by a combined surface treatment: Surface texturing by selective laser melting and plasma nitriding

EFFECT OF MICRO-TEXTURES AND CrAlSiN COATINGS ON THE FRICTION AND WEAR PROPERTIES OF 316L STAINLESS STEELS IN SEAWATER

Study on the Anti-Friction Mechanism of Nitriding Surface Texture 304 Steel

Surface Texturing for Low Friction Mechanical Components

Contact and Tribological Study of Micro/Nano Groove Texture on the Surface of Gas Bearing Materials Based on Nanoscale

Influence mechanism of grinding surface quality of 20CrMnTi steel on contact failure

Tribofilm Formation and Friction Reduction Performance on Laser-Textured Surface with Micro-Grooved Structures

The Friction And Wear Behavior Of Laser Textured Surfaces In Non-Conformal Contact Under Starved Lubrication

Friction and wear properties of textured surface for bearing steel with mango-shaped micro geometries

Tribological Properties of Surface Nanocrystallized 316L Stainless Steel Under ZDDP Lubrication