Abstract:Herein, we present the results of an experimental study on the mechanical properties of Fe-C alloys with different carbon contents (0.2, 0.45, and 0.8%) in a wide range of deformation rates (10−3–103 s−1) and abrasive wear resistance, which underwent combined laser thermal (laser surface hardening—LSH) and laser shock wave (Laser Shock Peening—LSP) processing. The combined treatment modes included a different sequence of exposure to laser thermal and laser-induced shock pulses on the material. The amplitude and duration of laser-induced shock waves were measured using a laser Michelson interferometer. The mechanical properties of steel samples were studied under conditions of uniaxial tension under static loads on a standard universal testing machine, the LR5KPlus, and under dynamic loading, tests were carried out on a specialized experimental complex according to the H. Kolsky method using a split Hopkinson rod. The abrasive wear resistance of hardened surfaces was studied using the Brinell–Haworth method. Studies have shown that the use of a combination of LSH and LSP treatments leads to an increase in both the mechanical properties of steels and abrasive wear resistance compared to traditional laser hardening. It has been established that in the combinations considered, the most effective is laser treatment, in which LSP treatment is applied twice: before and after LSH. Thus, after processing steels using this mode, an increase in the depth of the hardened layer was recorded—by 1.53 times for steel 20, by 1.41 times for steel 45, and by 1.29 times for steel U8—as well as a maximum increase in microhardness values by 22% for steel 20, by 27% for steel 45, and by 13% for U8 steel. The use of this mode made it possible to obtain the maximum strength properties of the studied materials under static and dynamic loading, which is associated with an increase in the volume fraction of the strengthened metal and high microhardness values of the strengthened layer of traditional LSH. The dependences of abrasive wear of the studied steels after various combinations of LSP and LSH impacts were established. It is shown that the greatest wear resistance of the studied steels is observed in the case when the LSH pulse is located between two LSP pulses. In this case, abrasive wear resistance increases by 1.5–2 times compared to traditional LSH.

Realizing the tribological feasibility of novel laser surface texturing techniques for cold spray kinetically metallized stainless steel

Effect of Nanosecond Laser Texturization on Tribological Behavior of AISI 321 Stainless Steel

Laser Surface Texturing of Stainless Steel − Effect of Pulse Duration on Texture's Morphology and Frictional Response

Hydrophobic surface texture air-liquid phase composite assisted laser processing and tribological properties

Tribological behavior and surface characteristics of severe surface plastic deformed as-cast and 3D-printed SS316L using LSP

Effect Of Pulse Duration On Tribological Behavior Of Textured Stainless Steel By Laser Surface Texturing

Wettability and Surface Roughness Analysis of Laser Surface Texturing of AISI 430 Stainless Steel

Tribological Performance of Textured 316L Stainless Steel Prepared By Selective Laser Melting*

Femtosecond Laser Texturing of Surfaces for Tribological Applications

Surface Texturing on Stainless Steel by Direct Laser Interference Lithography

Understanding the tribo-corrosion mechanisms of friction stir processed steel deposited by high-pressure deposition additive manufacturing process

Study of Laser Surface Texturing for Improving Tribological Properties

Cooperative Effect of Surface Alloying and Laser Texturing on Tribological Performance of Lubricated Surfaces

Research on Tribological Behavior and Mechanism of Laser Surface Texturing on Tool Surface in Hot Stamping of Al-Si-coated High-Strength Steel

Surface Modification and Effects on Tribology by Laser Texturing in Al2O3.

Improved tribological performance of AISI 316L stainless steel by a combined surface treatment: Surface texturing by selective laser melting and plasma nitriding

Effect of Combined Laser Thermal and Shock Wave Effects on the Mechanical and Tribological Properties of Steels

Laser Processing Technique of Stainless Steel Surface Nanotexture

Fabrication and mechanical measurements of micro- and nano-textured surfaces induced by laser processing

Tribological Properties of Laser Surface Texturing and Molybdenizing Duplex-Treated Stainless Steel at Elevated Temperatures

Combining laser surface texturing and double glow plasma surface chromizing to improve tribological performance of Ti6Al4V alloy