Abstract:Dry reforming of methane is one of the few chemical reactions which can effectively convert carbon dioxide (CO2), a major green-house gas, into a valuable chemical precursor, syngas (a mixture of CO and H2), that can be converted into chemicals and fuels via different synthesis routes such as the Fischer Tropsch synthesis. The inherent limitations of dry reforming reaction, for instance, rapid catalyst deactivation by coke deposition and the very high energy requirements, has restricted its use as a commercial technology. This study was performed to evaluate the potential of overcoming the limitations of dry reforming by integrating it with other commercial methane reforming technologies such as steam reforming and partial oxidation reforming in the context of industrial operating conditions. A thermodynamic and kinetic analysis of the combined reforming has been conducted using the software suite MATLAB®. The aim of this complicated assessment is to identify optimized combination of the three reformers and also the corresponding operating conditions that would utilize significant amount of CO2 while ensuring CO2 fixation, minimum carbon formation and optimum energy requirements. The thermodynamic equilibrium product distribution calculations involved the Peng Robinson (PR), Redlich Kwong (RK) and Soave Redlich Kwong (SRK) equations of state (EOS) to identify the best EOS that accounts for the non-ideality associated with the high pressure operation. The study evaluated simultaneous effects of temperature (200°C–1200°C), pressure (1–20bar) and feed mole ratios (of methane, steam, carbon dioxide and oxygen) on the equilibrium product distribution. The addition of oxygen and steam to dry reforming helped in decreasing energy requirements while simultaneously increasing the syngas yield ratio (H2:CO ratio). The numerical evaluation revealed an optimized operating condition of ∼750°C at 1bar pressure at a feed mole ratio CH4:H2O:O2:CO2 of 1:0.4:0.3:1. For this optimization, the system boundaries were limited only to a reformer block without considering the upstream and dowstream processes. At this optimized condition, the carbon deposition was eliminated and the CO2 conversion was observed to be 47.84% with an energy requirement of 180.26kJ. The study is further extended to include kinetic analysis of combined dry and steam reforming of methane. The preliminary findings of kinetic evaluation indicated an excellent agreement between combined kinetic model with the thermodynamic equilibrium results.

Optimizing syngas production for chemicals and/or hydrogen using 2 and 3-cycle Unmixed Reforming: A comparative thermodynamic study

Thermodynamic calculations for reactive sorption enhanced reforming of C2/C3 light hydrocarbons

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

Exergy analysis and CO2 emission evaluation for steam methane reforming

A combined thermo-kinetic analysis of various methane reforming technologies: Comparison with dry reforming

Enhanced hydrogen production in steam methane reforming: Comparative analysis of industrial catalysts and process optimization

The Condition Optimization of Synthesis Gas Production via Steam Methane Reforming Process of Natural Gas

Evaluation of the economic and environmental impact of combining dry reforming with steam reforming of methane

Thermodynamic Analysis of Steam Methane Reforming for Hydrogen Production

Hydrogen sulfide methane reforming: A kinetic modeling and techno-economic analysis study

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Process simulations of blue hydrogen production by upgraded sorption enhanced steam methane reforming (SE-SMR) processes

Steam, dry and autothermal methane reforming for hydrogen production: A thermodynamic equilibrium analysis

Multi-objective optimization of steam methane reformer in micro chemically recuperated gas turbine

Thermodynamic equilibrium analysis of steam methane reforming based on a conjugate solution of material balance and law action mass equations with the detailed energy balance

Double-Tube Reactor Design and Process Optimization for On-Site Steam Methane Reforming Processes

Design and exergy analysis of highly efficient chemical looping reforming processes of coking dry gas in double and triple reactors

Process Optimization for Syngas Production from the Dry Reforming of Methane over 5Ni+3Sr/10Zr+Al Catalyst Using Multiple Response Surface Methodology

Optimization and analysis of syngas production from methane and CO2 via Taguchi approach, response surface methodology (RSM) and analysis of variance (ANOVA)

Simulation modelling of hydrogen production from steam reforming of methane and biogas

Thermodynamic Analysis and Optimization for Steam Methane Reforming Hydrogen Production System Using High Temperature Gas-Cooled Reactor Pebble-Bed Module