Abstract:Dry reforming of methane is one of the few chemical reactions which can effectively convert carbon dioxide (CO2), a major green-house gas, into a valuable chemical precursor, syngas (a mixture of CO and H2), that can be converted into chemicals and fuels via different synthesis routes such as the Fischer Tropsch synthesis. The inherent limitations of dry reforming reaction, for instance, rapid catalyst deactivation by coke deposition and the very high energy requirements, has restricted its use as a commercial technology. This study was performed to evaluate the potential of overcoming the limitations of dry reforming by integrating it with other commercial methane reforming technologies such as steam reforming and partial oxidation reforming in the context of industrial operating conditions. A thermodynamic and kinetic analysis of the combined reforming has been conducted using the software suite MATLAB®. The aim of this complicated assessment is to identify optimized combination of the three reformers and also the corresponding operating conditions that would utilize significant amount of CO2 while ensuring CO2 fixation, minimum carbon formation and optimum energy requirements. The thermodynamic equilibrium product distribution calculations involved the Peng Robinson (PR), Redlich Kwong (RK) and Soave Redlich Kwong (SRK) equations of state (EOS) to identify the best EOS that accounts for the non-ideality associated with the high pressure operation. The study evaluated simultaneous effects of temperature (200°C–1200°C), pressure (1–20bar) and feed mole ratios (of methane, steam, carbon dioxide and oxygen) on the equilibrium product distribution. The addition of oxygen and steam to dry reforming helped in decreasing energy requirements while simultaneously increasing the syngas yield ratio (H2:CO ratio). The numerical evaluation revealed an optimized operating condition of ∼750°C at 1bar pressure at a feed mole ratio CH4:H2O:O2:CO2 of 1:0.4:0.3:1. For this optimization, the system boundaries were limited only to a reformer block without considering the upstream and dowstream processes. At this optimized condition, the carbon deposition was eliminated and the CO2 conversion was observed to be 47.84% with an energy requirement of 180.26kJ. The study is further extended to include kinetic analysis of combined dry and steam reforming of methane. The preliminary findings of kinetic evaluation indicated an excellent agreement between combined kinetic model with the thermodynamic equilibrium results.

The Condition Optimization of Synthesis Gas Production via Steam Methane Reforming Process of Natural Gas

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

The Characteristics of Sorption Enhanced Steam Methane Reforming for Hydrogen Production on a Complex Catalyst

Kinetic Study of Reactive Sorption-Enhanced Reforming of Coke Oven Gas for Hydrogen Production

The Evaluation of Reactive Sorption Enhanced Biogas Steam Reforming Process for Hydrogen Production Using Nano-Sized CaO Adsorbents.

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

Exergy analysis and CO2 emission evaluation for steam methane reforming

Exergy Analysis of Hydrogen Production by Steam Reforming of Hydrocarbons and Its Carbon Emission Evaluation

Enhanced hydrogen production in steam methane reforming: Comparative analysis of industrial catalysts and process optimization

Thermodynamic Analysis and Optimization for Steam Methane Reforming Hydrogen Production System Using High Temperature Gas-Cooled Reactor Pebble-Bed Module

Optimizing syngas production for chemicals and/or hydrogen using 2 and 3-cycle Unmixed Reforming: A comparative thermodynamic study

On the Modeling of Steam Methane Reforming

Thermodynamic equilibrium analysis of steam methane reforming based on a conjugate solution of material balance and law action mass equations with the detailed energy balance

Bi-reforming of methane: thermodynamic equilibrium analysis and selection of preferable reaction conditions

Process Optimization for Syngas Production from the Dry Reforming of Methane over 5Ni+3Sr/10Zr+Al Catalyst Using Multiple Response Surface Methodology

Thermodynamic calculations for reactive sorption enhanced reforming of C2/C3 light hydrocarbons

Research on the Optimization of the Operating Parameters of Methane Carbon Dioxide Reforming Using the Response Surface Methodology

The Intrinsic Kinetics of Methane Steam Reforming over a Nickel-Based Catalyst in a Micro Fluidized Bed Reaction System

Tri-reforming of Methane to Synthesis Gas

A combined thermo-kinetic analysis of various methane reforming technologies: Comparison with dry reforming

A Comprehensive Comparison Study: the Impacts of Gasifying Agents and Parameters on Chinese Herb Medicine Residue Gasification