Abstract:Unmixed Reforming (UMR) offers a promising alternative to simultaneously address the dual problem of energy and environment prevalent in the industrially adopted Steam Methane Reforming (SMR) process for syngas (a mixture of CO + H 2 ) production. UMR is powered by a novel form of combustion called Unmixed or Chemical Looping Combustion in which air and fuel alternately pass over an Oxygen Storage and Release Material (OSRM) bed in a reactor. The OSRM undergoes cyclic oxidation (with no NO x formation) and reduction, enabling the net energy released from both reactions to be used for reforming. This makes UMR relatively less energy intensive and more environment friendly. In this study, two UMR process variants, based on 2 and 3-cycle operation were simulated in Aspen Plus using the Peng-Robinson thermodynamic model. The conventional SMR process was also simulated for comparison purposes. The effect of relevant operating parameters such as temperature, pressure, steam to carbon (S/C) and NiO/CH 4 ratios in respective cycles in each variant was investigated. The effect of air/Ni ratio and recycling a fraction of the reformer exit gas on the oxidation and reduction cycles respectively was also studied. Optimal operating conditions were identified and a comparative energy analysis was carried out. The reformer exit gas composition was maximized at 850 °C, 1 bar and an S/C ratio of 3 in both variants. Under these conditions, CH 4 conversion was found to be greater than 99 %. The H 2 and CO compositions at the reformer exit were 55.2 % and 11.3 % in the 3-cycle UMR as against 41.3 % and 8.6 % in the 2-cycle UMR. The net energy requirement associated with the 2 and 3-cycle UMR variants, comprising of oxidation, reduction and reforming (as appropriate) was estimated to be 23.3 and 10.8 kJ/mol H2 respectively, as against 36.3 kJ/mol H2 in the conventional SMR process. Overall, the UMR offers advantages over the SMR process in terms of efficient feedstock utilization, higher methane conversion, reduced energy demand and lower emissions. When compared to the 2-cycle variant, the 3-cycle variant is superior in terms of steam utilization, operational flexibility and energy consumption.

Hydrogen sulfide methane reforming: A kinetic modeling and techno-economic analysis study

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

Exergy analysis and CO2 emission evaluation for steam methane reforming

Reconfiguration of Acid Gas Removal Process Matching the Integration of Coal Chemical Industry with Green Hydrogen

Hydrogen Sulfide Removal Process Embedded Optimization of Hydrogen Network

Scenario-Based Techno-Economic Analysis of Steam Methane Reforming Process for Hydrogen Production

Simulation modelling of hydrogen production from steam reforming of methane and biogas

On the Modeling of Steam Methane Reforming

Energy, environment, and economic analyses on a novel hydrogen production method by electrified steam methane reforming with renewable energy accommodation

Enhanced hydrogen production in steam methane reforming: Comparative analysis of industrial catalysts and process optimization

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Techno-economic assessment of hydrogen production via dimethylether steam reforming and methanol steam reforming

Methane-H2S Reforming Catalyzed by Carbon and Metal Sulfide Stabilized Sulfur Dimers

Process simulations of blue hydrogen production by upgraded sorption enhanced steam methane reforming (SE-SMR) processes

Technical and economic performance assessment of blue hydrogen production using new configuration through modelling and simulation

Sorption-enhanced Steam Methane Reforming for Combined CO2 Capture and Hydrogen Production: A State-of-the-Art Review

Optimization of SMR process for syngas production through a solar-assisted thermo-chemical reactor with a multi-layered porous core

Steam, dry and autothermal methane reforming for hydrogen production: A thermodynamic equilibrium analysis

Methane pyrolysis as a potential game changer for hydrogen economy: Techno-economic assessment and GHG emissions

Carbon-Negative production of Hydrogen through Sulfur Intermediates

Optimizing syngas production for chemicals and/or hydrogen using 2 and 3-cycle Unmixed Reforming: A comparative thermodynamic study