Evaluation of Fracture Properties in Ceramics Made of Sulfidic Mine Tailings
Farid Shabani,Mostafa Asadizadeh,Ahmadreza Hedayat,Lori Tunstall,Brian P. Gorman,Juan Antonio Vega Gonzalez,Jorge Wilfredo Vera Alvarado,Martin Taboada Neira
DOI: https://doi.org/10.1007/s00603-024-04058-3
IF: 6.518
2024-07-13
Rock Mechanics and Rock Engineering
Abstract:Mine tailings (MTs), as the waste of mining activities, comprise finely crushed rocks and minerals that remain after the valuable ore content has been recovered. MTs typically occupy vast areas of land and pose environmental challenges due to their significant volume and the potential for toxic substances to leach into the surrounding ecosystem. This study explores an eco-friendly approach by investigating the feasibility of repurposing sulfidic MTs for the production of ceramics. The research involves a systematic evaluation of the physical, mineralogical, and chemical properties of MTs. Subsequently, an appropriate production process is developed, involving the calcination of raw materials, grinding, binder mixing, forming specimens, and sintering. The chemical, physical, and mechanical characterization of the produced ceramics, including density, water absorption, porosity, morphology, crystalline phases, and compressive strength are thoroughly examined. Furthermore, the mode I fracture toughness of the ceramics is assessed using notched semicircular bending (NSCB) specimens subjected to three-point bending loading. The digital image correlation (DIC) technique is then employed to measure full-field strains on the specimen surfaces. Finally, mode I fracture properties of tailings-based ceramics are determined, including elastic opening displacement, critical crack opening displacement, and width and length of fracture process zone ( & ). In the present investigation, the incremental displacement analysis through the DIC technique for the evaluation of the FPZ length in ceramic materials was employed for the first time. The findings revealed a small fracture process zone (FPZ) in the ceramics with an average width ranging from 0.9 mm to 1.8 mm, and an average length of 1.03 mm.
engineering, geological,geosciences, multidisciplinary