Abstract:Over the last few decades, the demand for lightweight constructions has been increased continuously for several industrial applications, like automotive and ship building, to reduce the weight of vessels in order to minimize the CO2 emissions as a result of a lower fuel consumption. Lightweight construction is almost applied for ship applications, especially for yachts, which are designed by using aluminum for the deck constructions and steel for the ship hull. For joining these parts, a high-power laser welding process shall be developed. However, the welding of these dissimilar materials is associated with great challenges, due to the different physical properties and the formation of hard and brittle intermetallic phases, which may influence negatively the properties of the weld seam. The quality of dissimilar joints depends strongly on the mixture ratio between the molten amount of steel and aluminum. However, the mixture ratio varies over the weld seam length due to a high dynamic of the keyhole resulted by welding of this material combination. Furthermore, different batches of materials and varied sheet thicknesses t may influence the mixture ratio. In this study, a high-power laser welding process is developed with in-process control of the penetration depth tP by analyzing the spectral process emissions for dissimilar lap joints of aluminum alloy EN AW-6082 (t = 8 mm) and steel S355 (t = 5–7 mm). In the context of these investigations, an increase of occurring cracks within the weld seam and ejections of molten material with increasing penetration depth tP can be observed. To achieve a relative high joint strength, the penetration depth tP must be kept constant at a value of 1.4 mm. In case of varied batch of material, thickness t of the used sheets, welding speed vS, and leap of the steel sheet thickness t, the penetration depth tP requested cannot be achieved. Using the in-process control of the penetration depth tP, the weld seam quality remains almost constantly over the weld seam length, as shown in visual inspections, metallographic analyses, profiles of the penetration depth tP, and tensile shear testing. Among other things, the appearance of ejections of molten material can be avoided by using the in-process control of the penetration depth tP.

Detection technique for transition between deep penetration mode and shallow penetration mode in CO2 laser welding of metals

Study on the Transformation of Laser Welding Mode of Reduced Activation Ferritic/martensitic Steel CLF-1

Coaxial Monitoring of Penetration in CO2 Laser Welding

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

Novel approach for weld depth determination using optical coherence tomography measurement in laser deep penetration welding of aluminum and steel

Plasma light emission monitoring and penetration status recognition in CO2 laser welding of AZ31B wrought magnesium alloy - art. no. 682502

Laser Welding Penetration Monitoring Based on Time-Frequency Characterization of Acoustic Emission and CNN-LSTM Hybrid Network

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Laser Welding Mode Transition and Influence of Thermal Focusing on Mode Transition

Coaxial monitoring and penetration control in CO2 laser welding (I) - Penetration status characteristics and coaxial monitoring

Keyhole Detection by Arc Voltage Signal Processing During Plasma Welding

SOUND SENSING OF THE KEYHOLE BEHAVIORS IN PLASMA ARC WELDING

Investigations on in-process control of penetration depth for high-power laser welding of thick steel-aluminum joints

Study on welding phenomena observation method based on arc and molten pool light emission characteristics in visible and infrared wavelength region – development of image sensing technology for in-process welding monitoring technology

Finite element simulation of laser-generated ultrasonic waves for quantitative detection of internal defects in welds

Characteristic Analysis and Pattern Recognition of Arc Sound under Typical Penetration Status in MIG Welding

Study of mode transition in three-dimensional laser beam oscillating welding of aluminum alloy

Study on Penetration Sensing Method Based on Pool Oscillation and Arc Voltage during Pulsed GMAW

Study on Porosity Defect Detection in Narrow Gap Laser Welding Based on Spectral Diagnosis

Development of the Plasma Detecting System in CO 2 Laser Welding

Weld Penetration Identification with Deep Learning Method Based on Auditory Spectrum Images of Arc Sounds