Abstract:The plasma characteristics generated in laser welding are closely related to the weld penetration state and the resultant weld properties. In this paper, a real-time monitoring platform was built to monitor the plasma plume and spectral in laser deep penetration welding of the H340LA high-strength steel tailor rolled blanks. The image processing method and the spectral processing method were used to investigate the correlation of the penetration on the plasma plume and spectral. The weld penetration state was divided into three categories: excessive penetration, moderate penetration and partial penetration. It was found that the penetration was mainly affected by centroid height, plasma area and intensity. The weld gradually transitioned from partial penetration, moderate penetration to excessive penetration with the centroid height, plasma area and spectral intensity decreased. When the centroid height was 2.42–4.19 mm, the area was 6.96–17.58 mm2, and the spectral intensity was 447.98–1453.95 a.u., moderate penetration weld can be obtained. A plasma plume-spectrum based multi-features Back Propagation (BP) neural network model was purposed to predict the weld penetration state with an accuracy of 97%, which is greatly higher than that of the single-feature neural network model. This work provides technical guidance for realizing real-time control of weld penetration.

Study on Penetration Sensing Method Based on Pool Oscillation and Arc Voltage during Pulsed GMAW

Study on the Oscillating Phenomenon of Welding Pool with Different Penetration States in Short-Circuiting GMAW

Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods

Coaxial Monitoring of Penetration in CO2 Laser Welding

An Image-Processing Method for Extracting Kinematic Characteristics of Droplets During Pulsed GMAW

Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW

Investigation on the Dynamic Behavior of Weld Pool and Weld Microstructure During DP-GMAW for Austenitic Stainless Steel

On-line Monitoring of Penetration Status Based on Characteristic Analysis of Arc Sound Signal in MAG Welding

Characteristic Analysis and Pattern Recognition of Arc Sound under Typical Penetration Status in MIG Welding

Penetration Control of GTAW Process for Aluminum Alloy Using Vision Sensing

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

Penetration State Identification of Lap Joints in Gas Tungsten Arc Welding Process Based on Two Channel Arc Sounds

Weld Penetration Identification with Deep Learning Method Based on Auditory Spectrum Images of Arc Sounds

Keyhole Detection by Arc Voltage Signal Processing During Plasma Welding

Coaxial monitoring and penetration control in CO2 laser welding (I) - Penetration status characteristics and coaxial monitoring

Relationship Between Arc Sound Signal and Penetration Status in MIG Welding

Weld Bead Penetration Identification Based on Human-Welder Subjective Assessment on Welding Arc Sound

Plasma light emission monitoring and penetration status recognition in CO2 laser welding of AZ31B wrought magnesium alloy - art. no. 682502

The Arc Sound Characteristic on Mig Weld Penetration

A penetration depth monitoring method for Al-Cu laser lap welding based on spectral signals

Prediction of penetration based on plasma plume and spectrum characteristics in laser welding