Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. The laser welding of Cu–Al alloys for battery applications in the automotive industry presents significant challenges due to the high reflectivity of copper. Inadequate bonding and low mechanical strength may occur when the laser radiation is directed toward the copper side in an overlap configuration welding. To tackle these challenges, a laser surface treatment technique is implemented to enhance the absorption characteristics and overcome the reflective nature of the copper material. However, elevating the surface roughness and heat-energy input over threshold values leads to heightened temperature and extreme weld. This phenomenon escalates the formation of detrimental intermetallic compounds (IMC), creating defects like cracks and porosity. Metallurgical analysis, which is time-consuming and expensive, is usually used in studies to detect these phases and defects. However, to comprehensively evaluate the weld quality and discern the impact of surface structure, adopting a more innovative approach that replaces conventional cross-sectional metallography is essential. This article proposes a model based on the image feature extraction of the welds to study the effect of the laser-based structure and the other laser parameters. It can detect defects and identify the weld quality by weld classification. However, due to the complexity of the photo features, the system requires image processing and a convolutional neural network (CNN). Results show that the predictive model based on trained data can detect different weld categories and recognize unstable welds. The project aims to use a monitoring model to guarantee optimized and high-quality weld series production. To achieve this, a deeper study of the parameters and the microstructure of the weld is utilized, and the CNN model analyzes the features of 1310 pieces of weld photos with different weld parameters.

A penetration depth monitoring method for Al-Cu laser lap welding based on spectral signals

Laser Welding Penetration Monitoring Based on Time-Frequency Characterization of Acoustic Emission and CNN-LSTM Hybrid Network

Optical coherence measurement-based penetration depth monitoring of stainless steel sheets in laser lap welding using long short-term memory network

Measurement of pulsed laser welding penetration based on keyhole dynamics and deep learning approach

Prediction of penetration based on plasma plume and spectrum characteristics in laser welding

Weld Penetration Identification with Deep Learning Method Based on Auditory Spectrum Images of Arc Sounds

Coaxial Monitoring of Penetration in CO2 Laser Welding

Welding Quality Monitoring of High Frequency Straight Seam Pipe Based on Image Feature

Penetration prediction of narrow-gap laser welding based on coaxial high dynamic range observation and machine learning

On-line Monitoring of Penetration Status Based on Characteristic Analysis of Arc Sound Signal in MAG Welding

Penetration State Recognition during Laser Welding Process Control Based on Two-Stage Temporal Convolutional Networks

Characteristic Analysis and Pattern Recognition of Arc Sound under Typical Penetration Status in MIG Welding

Coaxial monitoring and penetration control in CO2 laser welding (I) - Penetration status characteristics and coaxial monitoring

An end-to-end framework based on acoustic emission for welding penetration prediction

Penetration State Identification of Lap Joints in Gas Tungsten Arc Welding Process Based on Two Channel Arc Sounds

Quantitative Detection of Laser Welding Defective Structure Based on Feature Exaction of the Pulsed Eddy Current Signal

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

Penetration Depth Modeling and Process Parameter Maps for Laser Welds Using Machine Learning

Plasma light emission monitoring and penetration status recognition in CO2 laser welding of AZ31B wrought magnesium alloy - art. no. 682502

Data-driven analysis of surface roughness influence on weld quality and defect formation in laser welding of Cu–Al

Real-Time CU-Net-Based Welding Quality Inspection Algorithm in Battery Production