Abstract:Skilled human welders can control the weld joint penetration through observing the molten pool. This suggests that a model may be developed to predict the backside bead width, that quantitively measures the weld joint penetration, from the weld pool surface. However, the weld pool surface is specular and subject to the radiation of the arc such that its measurement is challenging. At the University of Kentucky, the weld pool surface is measured using an innovative a 3-D vision sensor that can overcome the challenges caused by the specular nature and arc radiation; and the measured surface is characterized by three parameters. Because of the lack of physics based model, neural networks would typically be used to approximate the unknown correction, which is nonlinear in general, between the backside bead width and the characteristics parameters. Unfortunately, neural networks require large amount of data to train for adequate model accuracy. While the weld pool surface can be measured using the innovative 3D sensor, the ground truth for the backside bead width needs to be measured offline after the experiment and to this end the work-work needs to appropriately cleaned/processed. Large amount of training data needed may not be easily obtained. To improve the critical ability to accurately predict the backside bead width, models need to be established from relatively small amount of training data. To this end, the authors propose to use the support vector regression (SVR) method and hypothesize that a SVR model trained using the small amount of the training data available would perform better than that a multi-layer perceptron (MLP) artificial neural network model trained using the same data. Modeling results show that for the relatively small training data available, the optimized SVR model provides a more accurate prediction to the backside bead width. As such, the authors systematically advanced the ability to accurately predict the weld joint penetration. The use of the innovative 3D sensor to obtain the 3D weld pool surface and the proposed use of the support vector method to address the small data issue played crucial roles.

Penetration Depth Modeling and Process Parameter Maps for Laser Welds Using Machine Learning

Prediction of penetration based on plasma plume and spectrum characteristics in laser welding

Penetration prediction of narrow-gap laser welding based on coaxial high dynamic range observation and machine learning

Measurement of pulsed laser welding penetration based on keyhole dynamics and deep learning approach

Penetration State Recognition during Laser Welding Process Control Based on Two-Stage Temporal Convolutional Networks

Penetration/keyhole status prediction and model visualization based on deep learning algorithm in plasma arc welding

Prediction of Electron Beam Welding Penetration Depth Using Machine Learning-Enhanced Computational Fluid Dynamics Modelling

Machine Learning-Based In-Process Monitoring for Laser Deep Penetration Welding: A Survey

Weld Penetration Identification for VPPAW Based on Keyhole Features and Extreme Learning Machine

Investigating the ability of deep learning to predict Welding Depth and Pore Volume in Hairpin Welding

A VMD-BP Model to Predict Laser Welding Keyhole-Induced Pore Defect in Al Butt-Lap Joint

Laser Welding Penetration Monitoring Based on Time-Frequency Characterization of Acoustic Emission and CNN-LSTM Hybrid Network

Optical coherence measurement-based penetration depth monitoring of stainless steel sheets in laser lap welding using long short-term memory network

Modelling of Keyhole Dynamics and Porosity Formation Considering the Adaptive Keyhole Shape and Three-Phase Coupling During Deep-Penetration Laser Welding

In-process Monitoring of Penetration Depth and Contact Width During Laser Lap Welding Using Fused OCT Depth and Coaxial High Speed Image

Predicting Laser Penetration Welding States of High-Speed Railway Al Butt-Lap Joint Based on EEMD-SVM

Monitoring of the Weld Pool, Keyhole Morphology and Material Penetration State in Near-Infrared and Blue Composite Laser Welding of Magnesium Alloy

A penetration depth monitoring method for Al-Cu laser lap welding based on spectral signals

Machine Learning of Weld Joint Penetration from Weld Pool Surface Using Support Vector Regression

Data-driven analysis of surface roughness influence on weld quality and defect formation in laser welding of Cu–Al

Keyhole Morphology for Welding Parameter by Laser Deep Penetration Welding