Abstract:Abstract Online monitoring of the welding process is very important to the development of the modern manufacturing industry. However, monitoring welding defects in real-time and with high accuracy is challenging because welding is inherently a dynamic, non-linear process. In this paper, the forming defects generated during the melt Inert-gas welding of sheet steel as the object of research. We propose a multi-task simultaneous monitoring system for welding defects based on the YOLOv5 model, which can achieve highly accurate simultaneous detection of burn-through and weld deviation defects. Firstly, a passive vision system has been designed that can filter out strong arc light interference. In combination with a self-made camera bracket with flexible adjustment and repeatable positioning, clear images of the molten pool can be acquired. Compared to common methods that require a laser for weld deviation detection, all monitoring tasks can be performed with just one charge coupled device camera, significantly reducing the cost of deploying the system. Secondly, to obtain experimental data closer to the industrial field environment. We simulated different degrees of local and continuous burn-through by changing three parameters: welding current, plate thickness, and lap width. Four different deviations: left, right, and tilt were designed to obtain rich weld deviation image data. Finally, based on the above data, we compared several aspects such as detection speed, recognition accuracy, and loss function. The YOLOv5s model with the smallest model parameters was finally selected as the base model. The results show that our proposed multi-task simultaneous monitoring system achieves an average accuracy of 98.84% for the identification of four molten pool states. Burn-through defect and weld deviation detection with more than 50 frames per second can be achieved in the online detection state. This paper can provide some guidance for the online monitoring of the welding manufacturing process.

Study on welding phenomena observation method based on arc and molten pool light emission characteristics in visible and infrared wavelength region – development of image sensing technology for in-process welding monitoring technology

Vision-Based Online Molten Pool Image Acquisition and Assessment for Quality Monitoring in Gas–Metal Arc Welding

Vision sensing system and detection of backside image of molten pool in laser-MIG hybrid welding

Online identification of burn-through and weld deviation in sheet lap MIG welding based on YOLOv5

Development of a melt pool characteristics detection platform based on multi-information fusion of temperature fields and photodiode signals in plasma arc welding

Feasibility study of imaging spectroscopy to monitor the quality of online welding

Progress and Perspectives of In-Situ Optical Monitoring in Laser Beam Welding: Sensing, Characterization and Modeling

A weld defects detection system based on a spectrometer

Fundamental study of the quality measurement for wire arc additive manufacturing process by laser ultrasonic technique

Multi-information Detection System of Welding Process Based on Passive Vision

In-Process Monitoring of Lack of Fusion in Ultra-Thin Sheets Edge Welding Using Machine Vision

Visualization of gas metal arc welding on globular to spray transition current

Online Path Recognition for Additive Manufacturing and Arc Welding with Filler Wire Based on Multi-vision Information Fusion

Arc-Welding Spectroscopic Monitoring based on Feature Selection and Neural Networks

Development of in-process welding torch position control system using AI technology

The Intelligent Methodology for Monitoring the Dynamic Welding Quality Using Visual and Audio Sensor

Detection of Backside Width of Molten Pool in Laser-MIG Hybrid Welding

Embedded processing methods for online visual analysis of laser welding

Progress, challenges and trends on vision sensing technologies in automatic/intelligent robotic welding: State-of-the-art review

Vision based process monitoring in wire arc additive manufacturing (WAAM)

Novel low-cost vision sensing technology with controllable of exposal time for welding