Abstract:For gas metal arc welding, the effect of CO2 mixture in a shielding gas on a metal transfer process was investigated through the observation of the plasma characteristics and dynamic behaviour at the droplet’s growth-separation-transfer by the temperature measurement methods which were suitable, respectively, to the argon plasma region and the metal plasma region. At the present experimental conditions, the metal transfer process was a spray transfer type with 100%Ar shielding gas. On the other hand, with 85%Ar + 15%CO2 shielding gas, the metal transfer process was a globular transfer type in which the arc length was shorter, the width was narrower and the time interval of the droplet separation was longer. For both shielding gases, the metal plasma region near the arc central axis exhibited 6500–7500 K, which was lower than the argon plasma region. With 85%Ar + 15%CO2 shielding gas, when the metal droplet grew below the electrode wire, the region below the droplet has a high plasma temperature and a high concentration of iron vapour which surrounded the droplet. The region also exhibited a remarkably high electron number density. At the spray transfer process, the argon plasma region had an electron number density twice as high as the metal plasma region. Meanwhile, at the globular transfer process, the metal plasma region had a higher electron number density than the argon plasma region, which corresponded to a higher electrical conductivity near the arc axis. This means that the electric current goes through the arc axis easier than the spray transfer process. This condition increases the temperature below the droplet. The thermal expansion increases the force preventing the droplet from falling down. In consequence, the metal transfer takes the globular transfer type.

Visualization of gas metal arc welding on globular to spray transition current

Analysis of dynamic plasma behaviors in gas metal arc welding by imaging spectroscopy

Analysis of dynamic plasma behaviours in gas metal arc welding by imaging spectroscopy

Visualization of arc plasma and molten wire behavior in CO2 arc welding process by three-dimensional numerical simulation

Discussion of the Effect of Shielding Gas and Conductivity of Vapor Core on Metal Transfer Phenomena in Gas Metal Arc Welding by Numerical Simulation

Metal transfer electrical characteristics and its analysis in pulsed current gas metal arc welding

Study of metal transfer in CO2 laser+GMAW-P hybrid welding using argon-helium mixtures

Metal transfer characteristics of GMAW with strip electrode

Numerical simulation of metal transfer in argon gas-shielded GMAW

Role of material properties on metal transfer dynamics in gas metal arc welding

Effect of metal transfers and shielding gases on profiles of high current MAG welding

Spectral Analysis of the Dynamic Behavior of a Welding Arc During Pulsed Gas Metal Arc Welding of AA5083 Aluminum Alloy with ER5183 Wire

Numerical investigation on the influence of current waveform on droplet transfer in pulsed gas metal arc welding

Effects of active gases on droplet transfer and weld morphology in pulsed-current NG-GMAW of mild steel

Individual Effects of Alkali Element and Wire Structure on Metal Transfer Process in Argon Metal-Cored Arc Welding

Arc Properties and Droplet Transfer Characteristics in Cable-Type Welding Wire Electrogas Welding

Classification of Metal Transfer Mode in Underwater Wet Welding

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

Numerical simulation of GMAW process using Ar and an Ar–CO2 gas mixture

Research on Droplet Size of Short-Circuiting Transfer in CO2 Gas-Shielded Arc Welding Based on High-Speed Photography

Observation of Melting Pool and Electrode during TIG Arc Welding from High Speed Video Image