Abstract:For gas metal arc welding, the effect of CO2 mixture in a shielding gas on a metal transfer process was investigated through the observation of the plasma characteristics and dynamic behaviour at the droplet’s growth-separation-transfer by the temperature measurement methods which were suitable, respectively, to the argon plasma region and the metal plasma region. At the present experimental conditions, the metal transfer process was a spray transfer type with 100%Ar shielding gas. On the other hand, with 85%Ar + 15%CO2 shielding gas, the metal transfer process was a globular transfer type in which the arc length was shorter, the width was narrower and the time interval of the droplet separation was longer. For both shielding gases, the metal plasma region near the arc central axis exhibited 6500–7500 K, which was lower than the argon plasma region. With 85%Ar + 15%CO2 shielding gas, when the metal droplet grew below the electrode wire, the region below the droplet has a high plasma temperature and a high concentration of iron vapour which surrounded the droplet. The region also exhibited a remarkably high electron number density. At the spray transfer process, the argon plasma region had an electron number density twice as high as the metal plasma region. Meanwhile, at the globular transfer process, the metal plasma region had a higher electron number density than the argon plasma region, which corresponded to a higher electrical conductivity near the arc axis. This means that the electric current goes through the arc axis easier than the spray transfer process. This condition increases the temperature below the droplet. The thermal expansion increases the force preventing the droplet from falling down. In consequence, the metal transfer takes the globular transfer type.

An investigation of metal transfer process in GMAW

Dynamic Analysis of the Ultrasonic-Frequency Pulsed GMAW Metal Transfer Process

Metal Transfer and Arc Plasma in Gas Metal Arc Welding

Study on Metal Transfer of MIG/MAG

Metal transfer characteristics of GMAW with strip electrode

Modeling and analysis of droplet forming in gas metal arc welding short circuiting transfer

Numerical simulation of metal transfer in argon gas-shielded GMAW

An Image-Processing Method for Extracting Kinematic Characteristics of Droplets During Pulsed GMAW

Numerical Modeling Of GMAW ARC

Numerical investigation on the influence of current waveform on droplet transfer in pulsed gas metal arc welding

Analysis of dynamic plasma behaviors in gas metal arc welding by imaging spectroscopy

Current-independent Metal Transfer by Utilizing Droplet Resonance in Gas Metal Arc Welding

Experimental Investigation on Acoustic Control Droplet Transfer in Ultrasonic-Wave-Assisted Gas Metal Arc Welding

Three-Dimensional Modeling of Arc Plasma and Metal Transfer in Gas Metal Arc Welding

Current research status and prospect of metal transfer process control methods in gas metal arc welding

Analysis of dynamic plasma behaviours in gas metal arc welding by imaging spectroscopy

Metal transfer electrical characteristics and its analysis in pulsed current gas metal arc welding

Investigation Of Transport Phenomena In Three-Dimensional Gas Metal Arc Welding Of Thick Metals

Measurement and calculation of plasma drag force in arc welding based on high-speed photography technology and particle dynamics

Metal Transfer Characteristics of Rotating Arc Narrow Gap Horizontal GMAW

Study of metal transfer in CO2 laser+GMAW-P hybrid welding using argon-helium mixtures