Abstract:For gas metal arc welding, the effect of CO2 mixture in a shielding gas on a metal transfer process was investigated through the observation of the plasma characteristics and dynamic behaviour at the droplet’s growth-separation-transfer by the temperature measurement methods which were suitable, respectively, to the argon plasma region and the metal plasma region. At the present experimental conditions, the metal transfer process was a spray transfer type with 100%Ar shielding gas. On the other hand, with 85%Ar + 15%CO2 shielding gas, the metal transfer process was a globular transfer type in which the arc length was shorter, the width was narrower and the time interval of the droplet separation was longer. For both shielding gases, the metal plasma region near the arc central axis exhibited 6500–7500 K, which was lower than the argon plasma region. With 85%Ar + 15%CO2 shielding gas, when the metal droplet grew below the electrode wire, the region below the droplet has a high plasma temperature and a high concentration of iron vapour which surrounded the droplet. The region also exhibited a remarkably high electron number density. At the spray transfer process, the argon plasma region had an electron number density twice as high as the metal plasma region. Meanwhile, at the globular transfer process, the metal plasma region had a higher electron number density than the argon plasma region, which corresponded to a higher electrical conductivity near the arc axis. This means that the electric current goes through the arc axis easier than the spray transfer process. This condition increases the temperature below the droplet. The thermal expansion increases the force preventing the droplet from falling down. In consequence, the metal transfer takes the globular transfer type.

Measurement and calculation of plasma drag force in arc welding based on high-speed photography technology and particle dynamics

An Image-Processing Method for Extracting Kinematic Characteristics of Droplets During Pulsed GMAW

Numerical investigation on the influence of current waveform on droplet transfer in pulsed gas metal arc welding

An investigation of metal transfer process in GMAW

Experimental measurement of fluid flow in high-speed GMAW assisted by transverse magnetic field

Analysis of dynamic plasma behaviors in gas metal arc welding by imaging spectroscopy

Analysis of dynamic plasma behaviours in gas metal arc welding by imaging spectroscopy

Study on the Effect of Pulse Waveform Parameters on Droplet Transition, Dynamic Behavior of Weld Pool, and Weld Microstructure in P-GMAW

Research on Droplet Size of Short-Circuiting Transfer in CO2 Gas-Shielded Arc Welding Based on High-Speed Photography

Investigation on the Dynamic Behavior of Weld Pool and Weld Microstructure During DP-GMAW for Austenitic Stainless Steel

Numerical analysis of arc and droplet behaviors in gas metal arc welding with external compound magnetic field

Mechanisms of Gravitational Influence on Weld Pool Behavior and Weld Bead Performance in Variable Polarity Plasma Arc Welding across Different Welding Position

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

Droplet formation and motion characteristics in seven-wire rotating arc electrogas welding

Study of the Mechanism of a Stable Deposited Height During GMAW-Based Additive Manufacturing

Detect and Analysis of Molten Droplet in Short-Circuit Arc Welding Based on High-Speed Charge Coupled Device Camera

Droplet detachment and motion behaviors in laser-MIG hybrid welding of aluminum alloy

Role of material properties on metal transfer dynamics in gas metal arc welding

Numerical Analysis of Arc Driving Forces and Temperature Distribution in Pulsed TIG Welding

Comparative Study of Droplet Transfer Modes on Appearance, Microstructure, and Mechanical Properties of Weld During Pulsed GMAW

Effect of energy parameters on droplet transfer behavior and weld formation in laser-arc hybrid welding with cable-type welding wire