Abstract:For the numerical simulation of underwater wet flux-cored arc welding, the most crucial issue is to investigate the intense interactions between the underwater bubble, arc plasma, and molten metal. However, it is a great challenge to couple them into a single numerical model. In this study, a 3D three-phase flow model is originally established, which successfully couples the dynamic bubble, arc, and droplet. A modified Lee model is employed to realize spontaneous phase transition from liquid water to bubble gas. According to the simulation results, the bubble evolution is divided into four main stages, and two bubble separation modes are recognized. It is found that, both the changing pressure field around the bubble and the varying flow direction of surrounding water contribute to the unique bubble evolution patterns. As for the droplet, its violent up-and-down oscillation at the wire tip is mainly caused by the opposite gas drag forces, which are produced by the turbulent gas flow inside the bubbles. The upward gas drag force can even make the neck of the droplet disappear. With different droplet detaching angles, two predominant droplet transfer modes are numerically produced; when the angle reaches 147°, the droplet is pushed away and becomes a spatter. Furthermore, the underwater arc is found to be subjected to compressions from both the radial direction due to bubble necking and the axial direction due to droplet growth. The arc temperature and velocity vary significantly not only during the whole droplet transfer period, but also within each bubble evolution cycle. To verify the reliability of the model, underwater welding experiments and visual sensing are conducted. The simulated results match well with the experimental ones, with an 8% error in the droplet transfer period and only a 1.4% error in the bubble evolution cycle.

Droplet formation and motion characteristics in seven-wire rotating arc electrogas welding

Detect and Analysis of Molten Droplet in Short-Circuit Arc Welding Based on High-Speed Charge Coupled Device Camera

Effect of energy parameters on droplet transfer behavior and weld formation in laser-arc hybrid welding with cable-type welding wire

Research on Droplet Size of Short-Circuiting Transfer in CO2 Gas-Shielded Arc Welding Based on High-Speed Photography

Random Nature of Droplet Size and Its Origins in Short Circuit Co2 Arc Welding

Numerical Simulation of Molten Droplet Shape and Electromagnetic Pinch Effect in Short-Circuit Co2 Welding

Modeling the coupled bubble-arc-droplet evolution in underwater flux-cored arc welding

An Image-Processing Method for Extracting Kinematic Characteristics of Droplets During Pulsed GMAW

Visualization of arc plasma and molten wire behavior in CO2 arc welding process by three-dimensional numerical simulation

Measurement and calculation of plasma drag force in arc welding based on high-speed photography technology and particle dynamics

Numerical simulation of arc, metal transfer and its impingement on weld pool in variable polarity gas metal arc welding

Numerical analysis of arc and droplet behaviors in gas metal arc welding with external compound magnetic field

Effects of electrode polarity on the droplet transfer mode in self-shielded flux-cored arc welding

Microstructure and Mechanical Properties of a Weld Seam from Magnetron High-Current CO2 Welding

Molten Droplet Size Control in Short-Circuiting CO2 Arc Welding

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Droplet detachment and motion behaviors in laser-MIG hybrid welding of aluminum alloy

Numerical Simulation of Arc and Droplet Behaviors in TIG-MIG Hybrid Welding

Effective Control Approach on Molten Droplet Size in Waveform Controlled Short Circuit Co2 Arc Welding

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Numerical simulation of coupled arc-droplet-weld pool behaviors during compound magnetic field assisted gas metal arc welding